02-06-2023 08:58 AM - last edited on 02-08-2023 08:44 AM by Danny
We have an older C300 w/o pixel upgrade running firmware 1.1.3. Want to upgrade but camera will not recognize a 32 MB sdhc SD card. Displays error "check sd card". Any thoughts?
Solved! Go to Solution.
02-08-2023 06:00 AM
Sorry for the typo. It is actually a 32GB Sandisk. But the issue turned out to be a loose ribbon connector to the board that holds sd card reader. I re-seated that and camera now works fine. Thanks for the timely response.
02-06-2023 09:36 AM
What specific brand of card are you using? Also, is it full-sized or micro?
Did you attempt to format the card in the C300?
02-08-2023 06:00 AM
Sorry for the typo. It is actually a 32GB Sandisk. But the issue turned out to be a loose ribbon connector to the board that holds sd card reader. I re-seated that and camera now works fine. Thanks for the timely response.
02-07-2023 10:10 AM
Hi, RNWalkabout! Are you sure it's a 32MB card? We ask because that's a really, really small capacity and Cinema EOS cameras generally require far larger capacity like what you'd find on a 32GB card. Please verify this so that the community can get the clearest possible picture of what's going on.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.