Canon PRO-100 can't print panorama

[kenabr]

I'm trying to print a 13x25.5 print on matt paper. Lightroom shows my cell size as12.72x25.40. I keep getting a message that the media type or paper size are not set correctly. What am I doing wrong

[jrhoffman75]

You need to limit width to 12.95 inches, which is the actual width of A3+ paper.

[kenabr]

The paper is Red River 60 lb. Polar Matt C1S

[jrhoffman75]

Still need to set page width at 12.95. 

[Inkjetsetter]

Thanks to this forum I disovered the 26" panorama custom override. I just receieved a shipment of Palo Duro Baryta Fiber 300 from Red River Paper. Thanks again to forum members for the info about this EXCELLENT paper company!

I actually had to buy 13x38" paper, and will need to make one cut in each sheet to print.

Jose Rodgriguez has a video about printing 26" panos. His max image area is 12.731 x 25.685"

https://www.youtube.com/watch?v=me1oxx8xMnQ&t=102s

I'm guessing you really need to keep an eye on ink levels as prints of this size will be very thirsty.

This paper is fairly expensive and I dpn't want to waste any. Do any of the pros here have any additional comments/suggestions for successful printing with this custom size?

Has Canon made any firmware updates that would effect or improve oversize pritning? 

Thanks!

[Inkjetsetter]

My first attempt at printing 13x26 is giving me an error: "The media type & paper size are not set correctly"

Red River suggests using Photo paper Pro Luster for this paper (Palo Duro Baryta Fiber 300) and I have the appropriate Profile installed/selected.

I have the paper size set to 13x26 -which I'm gussing is the culprit. Joe Rodriguez suggests using an Image SIze of: 12.731 x 25.685". That seems to indocate 13x26" paper size would be crrrect.

I tried changing from the default margins to Top: .13  Bottom: .13   Left: .15    Right: .15

Still getting same error. 

Other setting?

Thanks

[jrhoffman75]

12.95 is actually the max allowable width. 13x19 is commercial roundoff.

[Inkjetsetter]

Instant resolve- thank you!

[jrhoffman75]

Its less ink than printing two A3+ prints, so you will have no trouble.

[kenabr]

Actually it can under custom settings print around 25.5inches. I ws able to print 38 inch panos on an Epson printer that died before I bought the Canon  Pro 100. I can't believe that Canon wants to be shown up by Epson.