Hello,I've gotten a couple of errors for the print head and I've replaced the print head with the genuine article, bought two just to make sure and we still have the same error.Any ideas what else could be the issue?Service tech in the Eastern North ...
I have bit of a dilemma. We have the Canon 6575. In the settings on our print server, there is a configuration where you can change the copier profile from its default "Basic Config" to lets say iR-ADV. When using the basic config, things such as dep...
I am printing with my PRO-4000 on 75 gsm kozo paper. This is a medium-light paper that works great, except when I have an image with black or very dark areas. In this case, I am getting a puckering pattern that seems to come from ink soaking the pape...
Good day Canon Community.I have a Canon Pro4000s and recently had a hardware error EC21-2F51. In service mode printer works normally. On normal mode the error appears no matter how many times I restart the printer. Installed new ink and a new MC-30 c...
I work with an IPF 8400.this morning I installed Ventura on my computer. It turned out I had to install a new driver, but the Apple does not recognize the driver, or the driver does not recognize the printer, either way, I keep getting notifications ...
Hi Everyone,I have had this printer for a while, but have been unable to get it to work consistently. I've followed the instructions that I've seen online and in the manual, but still no luck. This is a Windows 11 PC, and I can't get it to scan and...
Anyone know if there's a way to stop the waiting print jobs from being cleared when the printer power cycles? We have had, on occasion, a couple of errors which required a restart and after which, all pending print jobs are lost. This can be tricky t...
Hi,I would like to query snmp info from printers. I enabled snmp on the 3530i device, but UDP 161 port is closed on it. i checked that no restriction policy is enabled on it. What could be the problem, how to use snmp on it?
My image prograf 2000 keeps showing the error code EC31-2F1Cit says turn off, wait, then turn back on - that worked for a while (whenever it finished printing the error would show so I’d turn off and on and it’d be fine again!) but now it won’t goim ...
Hello. I recently purchased a used imagePROGRAF iPF8400 large format printer to make reproductions of artwork on canvas and a textured art paper. I am working off a MAC with macOS Monterey Version 12.5 and my Printer Driver is for the iPF8400 version...
Can someone give tips what can be the problem with the BLUE color? I checked/cleaned/interchanged drum, no visible signs of any problem or broken contact... The error is spanned on the whole page without any brake in case of color printing. The patt...
I am having an issue with my Canon imagePROGRAF GP-4000 Large Format Printer.It was printing fine as of December 2023 -- we haven't changed stock, ink etc. Now, all the inks have started smudging on some paper stocks and MBK is smudging on ALL stocks...
I have a 4100 deployed through our network at our office. I can get to management fine, and it prints from USB without issue. It seems that lately it is showing as "offline" all the time. Has anyone seen this issue or have a resolution?
recently upgraded to ventura os on mac studio. downloaded new printer driver.there is a redesigned print settings box. with cut sheet loaded to printer, auto select paper, returns paper mismatch error.with main tray selected, same error message.it se...
Rather than manually logging into each separate printers' admin webpage and then changing LDAP log in information when the password eventually expires, is there simple tool/script that could be set up for each printer? I'm keeping it generic because ...
