cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Error EC11 2F2A / Canon PRO4000

EduardoAlemao
Enthusiast

What about that ? Any thoughts??

Can not use the machine....

IMG_1412.jpeg

 

1 ACCEPTED SOLUTION

After all this was my fault.... I overused some WD40 inside the machine. There is a disk in the feed mechanism, and it got sticky after some weeks. All working now!

View solution in original post

3 REPLIES 3

rs-eos
Elite

If you've already tried turning it off and back on, and it continues to display this error code, unfortunately you'll need to see about having it serviced (Canon customer service center).  Refer to page 794 in the User Manual for details.

--
Ricky

Camera: EOS 5D IV, EF 50mm f/1.2L, EF 135mm f/2L
Lighting: Profoto Lights & Modifiers

Turning it off and back on doesn't solve the issue.... 

After all this was my fault.... I overused some WD40 inside the machine. There is a disk in the feed mechanism, and it got sticky after some weeks. All working now!

Avatar
Announcements