how can i load the IJ scan utility on a iR-ADV C3926
how can i load the IJ scan utility on a iR-ADV C3926
Posts
Canon Supplier Needed For Sourcing Printing
Hi, I'm seeking out a supplier to source printing onto a clear acrylic plate. We are located in La Crosse, WI area. The previous supplier performing this step isn't an option unfortunately going forward. Image of the finished product is below. The pr...
imageRUNNER ADVANCE DX C7770i printing dept mgmt reports by date range
Hi. Am wondering if it's possible to set a custom date range to print department/user management reports, please? I print every month, at the beginning of the month, and missed one. Thx
IPF8300 Error code E161-403F
Greetings, First post. I'm trying to breath life back into an Image Prograf 8300 which has sat idle in a climate controlled room for a few months. It came out of a working environment and was functional when stored - or so I was told. I fired it up a...
Canon ir c5030i fixing issue
Hi guys, I replaced fixing film coz it had a physical damage. But still colour not fixing and paper gets jammed inside the fixing unit. Please check the below image. Please help me to solve this issue thank you very much
imagePROGRAF TM-300 Print Head Error
I replaced the printer head and ink in our image PROGRAF TM300 and keep getting this error..."Printer head cannot be recognized correctly. Open the the top cover and install the correct print head". I installed the correct print head which is the PF0...
imagePROGRAF TM-350 How to Lm36 as a standalone scanner
Hello. I'm looking for an answer if LM36 scanner can work without plotter? I need just a scanner but I heard different answers from sellers in my country. Some says it needs a plotter (prograf tm350) to set it up and use it, some says that it can ...
imageRUNNER ADVANCE DX C3800 Series: How to set up Direct Send
Hello I know that you don't officially offer support here but if a registered member can help great. We are trying to setup Direct Send so if users want to scan to email they can. Not sure how this is achieved. I am looking at the How to set up a m...
imagePROGRAF TM-340 MFP Lm36 Help needed for scanner setup
This was bought without my knowledge and they want me to set it up. I can't figure out how to setup the scanner at all. They want to be able to scan to email, is this possible? I have the scanning part plugged into the network and it has an IP but I ...
Resolved! iR-ADV C5840 Printer driver
Hi all,i just installed an iR-ADV C5840 on 3 new Win 11 Pro PCs.The new printer driver (Generic Plus PCL6 Printer Driver V3.12) shows another picture on the left than the old driver on the Win 10 PCs. See below.The Old driver on the Win 10 PCs was ve...
ImagePrograf Pro-4000 putting a cyan band on first few inches of prints
Hello,I am having a strange issue with my wide format printer. Whenever I send a new job, the printer is printing extra cyan for the first couple of inches on the lead edge. It will only do this on the first print, so if I send 20 prints, I'll have 1...
Resolved! iPF8400SE head adjustment cannot done after changing the print head
HiAfter changing a genuine head my iPF8400SE could not adjust printhead and there is vertical line appears on the print. Tried to carry out the printhead adjustment, both standard and simple but after finishing the process it says printhead adjustme...
canon ipf670 printhead head error
i have a canon ipf670 and it has been throwing up a replace printhead error. i have cleaned the printhead just the surface not a flush and the area that receives the discharged black ink and cleaned and reset the waste cartridge. Im running an all bl...
imageRUNNER ADVANCE DX C357iF Unable to find NPG-58 toner
Hello canon community, im new to this, i will try my best to not sound stupid or annoy anyone, apologize if so.I do have a question regarding my toner, currently im using a canon printer, model is Canon imageRUNNER ADVANCE DX C357iF and i cant excatl...
imagePROGRAF TM-350 MFP Lm36 Lines in my scans
Every time I clean the scanner glass (with 99% isopropyl and microfiber towel) I get worse lines in my scans. Is there something else that needs cleaning that could cause this?
