Printer Software & Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

device not found to download driver

Color Image MF 731c/733c shows that it is connected to the ,wifi (password accepted and wifi symbol on) however, when trying to download MF drivers, device is not dectected.  turned on and off multiple times, re-booted computer multiple times and com...

annaj by Apprentice
  • 6165 Views
  • 3 replies
  • 0 likes

PIXMA MX922 & Windows 10 (64)

I recently heard from Tech Support which sent me detailed info to connect the printer to the WiFi.  I followed all instructions, downloaded the Windows driver and the printer shows me the network, tells  me it's connected to the network and has the b...

DeesCT by Contributor
  • 2929 Views
  • 2 replies
  • 0 likes

Canon Pixma Endurance G4600

Hi, I recently got a Endurance G4600, the only way to get it to print normally (quickly) is to use it via USB. On my 2nd computer to get it to wirelessly print I have to always stop and start the "print spooling" under services. I'm using Windows 7 a...

Cannot print PIXMA E3170

I bought a new printer Canon PIXMA E3170 and connect it with my pc. But when i try to print it shows the error message that "printer is not found". I properly check the connection. all is ok but still shows the same issue. Then one of my friends sugg...

Can't print - PIXMA MX922

I'm using Windows 10 (64)The printer shows a WiFi connection but I cannot print.  It is not connected to the Router with a Network Cable.  I've never used a wireless printer before.  This is problem 1. I do not have printed information on the install...

DeesCT by Contributor
  • 1566 Views
  • 1 replies
  • 0 likes

Failure to print or stops printing halfway

I have a Canon Maxify MB5420.  Most of the time I click print, nothing happens.  It takes hours to print.  Other times it will start printing, print a page of 2 then on the 3rd page it stops half way and the printer says "      It will then not finis...

Canon MG3122 Network

I recently moved, bringing my printer with me with a completely new network but my printer is still connected to my old network. I've been trying to figure out how to change it without a USB because mine got lost in the move. I'm just wondering if it...

KevMusic by Apprentice
  • 1962 Views
  • 2 replies
  • 0 likes

MX922

I have never had such a difficult time connecting a printer to a wifi network. Just got my MX922 yesterday (well it is now 12:27). And it is still not connected.  Yes I read these boards. Yes I found the option for the ridiculous instructions for hol...

Susan2 by Apprentice
  • 1973 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!