Printer Software & Networking
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

selphy 900

I purchased a Selphy 900 in order to print wirelessley from my iPhone 4S. It is running iOS 6.0.1 and my computers are Macs runing OS 10.8.2. I installed Conon's Easy-PhotoPrint V 2.2.0. Hook everything up and printing and set up are not workibng rig...

GolgiBoy by Apprentice
  • 1993 Views
  • 1 replies
  • 0 likes

Canon MX700 - wireless printing

I have a Canon MX700 printer (not wireless), and a Linksys Router – WRT54G2.  I’m trying to setup the printer on a wireless network so it can print via mobile devices (ie. MacBook, iPad and iPhone).  I’ve gotten to the point that the printer LAN has ...

buzytee by Apprentice
  • 8265 Views
  • 1 replies
  • 0 likes

Wireless printer does not print.

I recently changed routers and since, my printer does not print.   I have checked to be sure it is selected in the printer settings, the printer is turned on, and wi-fi light is on.  I have turned off the printer and computer and started over, still ...

2nd computer connectivity problem with copier.

My intel computer's request to print is not accepted by the copier. With my Mac there is no proble. Does the Intel machine need to be configured in some way? With me older, now discarded copier there was no problem. Cznn't find a resolution to this i...

Kerry by Apprentice
  • 1927 Views
  • 1 replies
  • 0 likes

Help With Wireless Setup PIXMA MX890

I have just installed a MX890 wireless through NetGear router WNDR4000 firm vervion 1.0.0.90 and power point XAVN2001.  I have Dell XPS desktop computer with Win7, with Avira visus program at that machine.  Dell laptop xps, Win7 with McAfee on this m...

MG5320 Wireless Issues

I am able to print wireless from MS Office.  However, whenever I try to print from the web or any other program I get the error message "printer is offline" and it won't print unless I plug in the USB cable.  Can anyone shed some light on this issue ...

kmcroton by Apprentice
  • 3549 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
03/28/2023: New firmware version 1.0.3.1 is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.