Point & Shoot Digital Cameras
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Lens error 60 on PowerShot SX70 HS

Periodically my camera freezes up with a "lens error 60". It seems to happen randomly when the lens has been fully extended and wants to retract automatically after the one minute time but fails. I had the same issue when I first bought this camera a...

jmorlan by Contributor
  • 5825 Views
  • 2 replies
  • 0 likes

Powershot sx530 no nfc

why did yall disable the NFC feature in your PowerShot SX530? Please bring that feature back. Without wifi, you cannot transfer pictures so quickly. NFC was the reason for my purchase. Many customers are upset.  My camera to me is worthless and it co...

Hecramrz by Apprentice
  • 1034 Views
  • 1 replies
  • 0 likes

SX10is won't retain date/time

Granted this is an old camera, but it has all the capabilities my wife wants! For some time (although she just told me about it), whenever she powers the camera up, it needs to have the date/time set. She's just been hitting OK, which gets her out of...

Resolved! PowerShot ELPH 360 HS Memory Card error

I have a Powershot 360HS that keeps giving me memory card errors. I have had this camera for 6 years and have had NO trouble with the 50++ SD cards that I have for this unit. Today, ALL my SD cards are getting error messages.Also, there is no access ...

G15 "Lens error"

My Powershot G15 has been working fine, and has taken no drops/hits. But now at power down, it tries to retract and close the lens 3 times. It always succeeds, but displays "Lens error. Will shutdown automatically. Restart camera". Occasionally it do...

whaler by Apprentice
  • 2526 Views
  • 2 replies
  • 0 likes

PowerShot SD1100 IS, lens does not retract

My camera lens does not retract after pressing power, buzzes high and low repeatedly then screen says lens error restart camera, then powers off. Pressing power again may start camera again but no Auto Focus. Lens still not retracting at power off. H...

JRP by Apprentice
  • 5040 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements