Point & Shoot Digital Cameras
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Problem with depth of field

I have a Canon PowerShot G12 and haven’t been able to vary the depth of field in my photos.  When I set it to aperture priority with a low f stop, the depth of field looks the same as if I use a high f stop.  It also looks the same as if I shoot the ...

Resolved! SX 50 HD turns off after shot is taken

Have been using my SX 50 HS for about 8 months with no problems. Today, after I take a shot, the camera turns off completely.  Not the display, the actual camera.  I have changed batteries to confirm that it is not battery related.  This is agonizing...

colecuts by Apprentice
  • 3784 Views
  • 3 replies
  • 0 likes

Powershot G7 X screen issue

Hello, my canon G7x is fairly new, at first everything was fine but then this one issue came into existence. The screen will not come on after I press the power button, when I took it out the box the screen came on and everything was fine, just a mes...

SX30 IS Not Recogized By Computer

I have a Powershot SX30 IS that in the past would fire up the camera window when camera was connected and downloaded photos.  It worked for a long time on this computer running Windows 7.  Then the camera window would not start and the computer would...

georgedn by Apprentice
  • 3628 Views
  • 3 replies
  • 0 likes

Resolved! DISABLE the AUTO FOCUS on a Canon G3 X ?

I want to use my G3 X  for macro work and would like to disable the auto focus and focus manually.  The camera seems to require that the shutter button be held down half-way in order to focus manually which is extremely difficult, especially in the f...

Resolved! question on filters again

Several filters came with my sx500 the only one i put on was the UV and only because I wanted to protect the orginal lens. I am now wondering if since I had to use an adaptor to connect the UV filter that it may not be a good thing. Any comments?

nan156 by Enthusiast
  • 4682 Views
  • 6 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements