Office Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

MAXIFY MB2720 how to clear code 2802

Code 2802 will not clear. There are no papers hung in autofeed tray. Code will not clear after pressing OK. My printer will not work due to this code. I have tried unplugging to reset it. This code still comes up. I have checked the feeder as well to...

jkcbcctc by Apprentice
  • 717 Views
  • 1 replies
  • 0 likes

TWAIN Driver and imageCLASS MF4150

My MF5200 used to interface with Twain, but it doesn't anymore.  Is there a way to use a twain driver with this multi-function laser printer?  If so, how?  Thanks.

JimMayor by Apprentice
  • 1210 Views
  • 3 replies
  • 0 likes

Issues with my computer recognizing imageCLASS D1650

Purchased a D1650 Image Class 3 months ago and bypassed the PIN configuration as I intended to only print and copy.  Connected via USB and all worked well until this morning my computer did not recognize the D1650.  Have reinstalled drivers several t...

MB2720 only prints partial black ink

My Maxify MB2720 will only print partial of the black ink, leaving lines randomly throughout a document.  All of the ink cartridges are full and I have tried all of the troubleshooting on the printer itself (cleaning, deep cleaning, head alignment, r...

RadonRid by Apprentice
  • 607 Views
  • 1 replies
  • 0 likes

Resolved! MF644CDW stopped printing envelopes

Was able to print envelopes with no problem then all of a sudden it won't any more. Have checked the paper settings and they seem to be the same. Using the multifunction tray. Now it only prints on full size paper and won't activate the multifunction...

randyc1 by Contributor
  • 2278 Views
  • 7 replies
  • 0 likes

Resolved! MF642Cdw Load paper error

This MF6422Cdw is a newly installed machine for my office.  Every time we print we have to select on the machine the paper source as it gives an error of "Load Paper Drawer 1".  There is paper in the tray, it is correctly identified I believe, so I'm...

woodmarx1 by Apprentice
  • 27731 Views
  • 11 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements