Office Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

GX2020 Mega Tank printer POOR PRINT QUALITY

Have a GX2020 printer, I think (without searching for exact age/recpt) it is about 1-2 years old.  The print quality is not good, horizontal blank lines in color sections of print.  Using "standard" print quality, plain paper.  It is noticeable when ...

imageCLASS D530 - is stuck in copy mode.

My Canon D530 is stuck in copy mode, and I cannot get it off of this mode. I have shut it off, tried the reset button and  tried to reset it from the menu but there is no option to go to print mode there. All of these were suggestions given to other ...

DRKT500 by Apprentice
  • 2037 Views
  • 2 replies
  • 0 likes

imageCLASS MF654Cdw "load paper in tray 1"

Hello Friends!My wonderful printer is saying load paper in tray 1. There is paper in tray 1. I can't cancel the job from my laptop as there's nothing there, I can't cancel it from the printer itself as it shows me the error but there's not a cancel b...

imageCLASS MF451dw Out of Paper but not!

Recently moved. Previously my PC and printer were connected USB to USB.  I cannot locate that cord.  I found a cord that has the USB plug to the PC and a square plug for the printer.  I can use the printer to copy, but when I try to print it puts an ...

REverman by Apprentice
  • 810 Views
  • 1 replies
  • 0 likes

Cannot scan from my MF654CDW to my Windows 11 computer

I am able to print from my computer to the printer but in trying to scan a document, I get an error message on my screen that says,"Cannot communicate with the scanner.  The cable may be disconnected, or the scanner may be turned off.  Check the scan...

loclhero by Apprentice
  • 6007 Views
  • 2 replies
  • 0 likes

LBP632CDW Manual Feed Tray not working

Brand new LBP632CDW  not printing from manual feed tray.   Paper pulls in correctly all the way into the printer.  Looks like settings ok but went printing a document, pulls from regular tray (which works ok).   Followed directions in manual but no c...

TITO by Apprentice
  • 2526 Views
  • 2 replies
  • 2 likes

MB2320: Lost the scan feature when re-installed on new Mac

Bought a new Mac running Ventura 13.2.1.  Reinstalled the trusty MB2320.  Prints fine, but the scan option is completely gone?!?!  I downloaded "IJ Scan Utility2" and double clicked to activate and got the following error message,A scanner driver sup...

David100 by Apprentice
  • 3335 Views
  • 3 replies
  • 0 likes

MF642Cdw not printing cyan or magenta toner

My Canon MF642Cdw has stopped printing the magenta toner and does a weird fade when printing Cyan. This started a little over a year ago, i have now been just using it for BW printing. I replaced all the toners back then and just replaced the Cyan an...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements