02-23-2024 03:12 PM - last edited on 02-25-2024 03:30 PM by Kristoff
The prints come out with a moving spot along every other printer and the spot changes location. The spot is located in the right side of the print and moves up and down, it looks whiteish on black and white prints and water marked on color prints. I already tried all the maintenance available on the device and made no difference. Picture for reference, the second set look shiny because they were laminated (Those were the clean prints from the badge).
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.