Hi everyone,The other day, my printer gave paper jammed error. I put too much paper in the feeder while printing, and it take more than one paper in one time. Since I was in a hurry, I took out the papers without looking at the instructions. More tha...
How do I gain reconnection between my Canon imageClass MF733cdw and my HP desktop? I can't find my original install disk. Any help would be greatly appreciated.
Please can you tell me where to set double-sided printing for the 656 and where to turn it off. I've turned it off previously but today for some reason it's started printing double-sided again. When I go to the portal, both User and Admin, it shows...
Trying to print on #10 envelopes with LBP236DW using manual feed tray. The specifications state that the minimum margin for this printer is 5mm, but the area being clipped is 1/2" from the edge—almost 3X as large, so all the envelopes I formatted for...
I am using Debian 12. I bought a Canon LBP6030 printer.I installed the linux driver (linux-UFRIILT-drv-v500-uken-18.tar.gz) from their website.lpinfo -v gave me usb://Canon/LBP6030/6040/6018L?serial=0000A1O25L4L.So, I ran the following command to add...
I just purchased a new Canon imageCLASS LBP253dw printer from Amazon. I unboxed this and installed the drivers on my computer. It will print from my computer but will not allow me to enter the System Manager mode without a ID and password. The paperw...
Hi community member,QUESTION: Does anyone know the procedure to replace the RM1-4426-000 pickup roller?ISSUE DESCRIPTION: I would like to replace the RM1-4426-000 pickup roller of the LBP7680CX. The pickup roller shaft needs to rotate in order to re...
Let me start off by saying this is the 1st laser printer that I have invested in and I was so excited and that quickly has changed. I'm having so many issues with this thing! I normally buy small cheap printers but need to do some large jobs (3-5K pa...
I'm using the ImageClass LBp622CDW.The printer is printing in a blueish, hazy hue on the back side of the page. The front prints just fine, but when I go to flip the paper and reprint on the back, it doesn't print nicely except on the spots where it ...
I owe the Community an apology. I was flamed for posting my inquiry in a thread about another printer--had no intent to hijack a thread. In the time I spent reading posts and looking for my topic, I noticed how often posts contain parallel topics tha...
I'm about 98% there and just need a tip. I have setup SMTP/POP and all related port settings, etc (google app password, google's unique port numbers, etc) so that when I send an email to a gmail account, it connects and wants to pull it. I have it se...
I have a new MF273 and and 2020 iMac running Ventura. I have connected the printer via WiFi and its working fine. However, the scanner is not recognized by either of the Canon software apps. When I run MF Toolbox it tells me there are no scanners....
I'm not sure how to describe the 2nd side of scanned documents. The second side is scanning, but a portion of the scanned page is blurred? distorted?Is this a part that needs to be replaced? If so, what part would be doing this?Is this correctable...
Hi all,we are using canon mf642c ink jet printer in our office. The printer is out of toner ink but stills printing for couple of users but one of the user is receiving error on his laptop and not able to print as in the attached image.can we bypass ...
Hello,I'm unable to update my firmware on my mfc462CDW due to my serial number being rejected. I'm not sure why it needs my serial number and from searching the forums this seems to be due to an old bug in the system where it doesn't accept serial nu...
