What a pain! The mac is not listed on the Scan to PC setup. I cannot get the scanner to find the computer and the comuter just keeps telling me to go to the scanner driver which I have installed twice. My windows install was perfectly smooth. What ...
Our office has a Canon F164802. That is what the number on the back label says. One issue we are encountering is when ever we print a document with more than one page it will always print the second page twice. And if you have say 4 pages it will pri...
Is there a Windows 10 driver for the iR3025?
I can scan and print on my Canon Imageclass MF212-W from the computer but cannot copy or use any functions on the printer keypad. It's as though it's in permanent sleep mode. Tried downloading the driver again from the Canon website but I have an old...
I have an MX 455 connected to the local network via WiFi. When trying to install the drivers the installtation routine (mp68-win-mx450-1_00-ea32_2.exe) aborts with after installing the printer and the fax drivers. Manual installation of the scanner d...
Trying to get my MF8580 to print single sided when printing Excel Multi Tab Documents... all setting appear to be set at 1:1... it does print the first page as a single but then reverts to 2 sided copies where single sided copies are needed... Any h...
Our brand new mf229dw stops printing after 3 or 4 pages. Printing from Woed 2016 running on Windows 10. Tried both the XPS and non-XPS drivers.
PIXMA MX452. Scanned images have started to display multiple thin black lines top to bottom and covering about 1/5th of the 8-1/2 x 11 image using the document feeder. I've cleaned the glass plates without success. Image on the flatbed scan is clear.
Just replaced black cartridge on mx410 and now I'm continually getting "Support Code 91 - low ink" message and won't print. I'm only using black and set that up in the utility section...held down the "Stop" button for 10 seconds and didn't reset. Has...
We just purchased an imageCLASS MF227dw and set it up today. One of the primary uses will be scanning multi-page documents using the automatic feeder. However, every document scanned has a line of blank space, dead center down the entire page. I remo...
Why does my printer (Canon MF4320-4350 UFRII LT) print Euro symbols over the capital letters on my PDF document? Is there a setting or something that I need to change to get it to print normally?
Running windows 10 on computer. I have beena ble to scan until the past couple of weeks. MT toolbox states cannot communicate with scanner. Two identical printers the same problem. error when trying to scan from printer - an eror has occured. I ...
My canon Pixma MX882 states "Printer Error has occurred. Turn off machine then turn back on. if problem persists see manual" I don't have manual what do I do?
Cannot get my almost new MF8580CDW to operate on Windows 10 (64). It worked great on Win8 and OSX. Have downloaded the current drivers, but nothing. I'm using a USB cable connected directly to the PC and the latest softward downloaded directly from C...
After a power outage, the scren on my Pixma NX922 went blank. How do I get the screen back?
