My printer continues to give error code 1660 even after replacng all of the ink. The lights dont come on the ink. They are reseated and I can't reset this. I have follwed the plug and restart instructions. Help.
Hi, I have a Canon MX922 printer, and I cannot send a fax. I can hear it dial the number, the other fax answers (I sent it to a friend) but the MX922 continues to say calling on the LED and eventually hangs up with a "line busy" report #018. I hav...
We have an MX925 which is great - when it works! It has already been sent back twice for coming up with the message Printer not responding. Having looked on the boards here I have tried the wiping the white "tape" near the ink cartridges, but that ...
helloI have a canon MX920 printer series and operating on windows 10. The printer is conneced to wifi and is online but I can't print anything because my computer is say that the printer is turned off. What do i do? Thanks
I have the MX 920 and MG 5400 and can not print from web pages today on either- although no problem yesterday. Has Canon issued an update that allows slection to lower tray. I do not have any need for a different size of paper. Frankly - if not I nee...
i have a problem with my canon MF4770n, it give me a black page when i am scanning, any picture nothing. how can you help me to fix this problems?
I have the Canon PIXMA MX490 series printer. Recently it will not function. The power light is on but I have no access to the menu(it does not show up). The only way I can power it down is by unplugging it. Can anyone shed some light on this, please...
I get this error message every time I try to scan to my PC from my scanner wirelessly.It works when I scan to other computers in the office, just not to mine.Not sure how to fix?
I use an MX390 printer in my job and until recently it has been fine but about 2 weeks ago it started printing to the left side of the page without any of the settings being adjusted. I have looked through the manual and can't find a solution.If anyo...
Hi - I have a imageFormula P-208II scanner and when I scan (no matter what options I select) I get the following error:The filename, directory name, or volume label syntax is incorrect I even taken it so the destination folder is C root (Windows 7)Th...
I have set up this machine on my network using a switch for the extra ethernet connection its a wired network.The printer copy works fine but I cannot get it to scan. Error code 255.0.0 and a message on the printer telling me to connect my computer ?...
Everything else works, just stopped sending and receiving faxes. Phone lines all check out (had the phone company out). Is there a factory reset or something? Thank you
Brand new out of box. After screen is on for a couple minutes or so the the vertical green line appears. After power save mode and later awake the line is not seen until couple minutes.
Subject | Author | Posted |
---|---|---|
04-25-2024 04:11 PM | ||
04-25-2024 03:33 PM | ||
04-20-2024 04:07 PM | ||
04-19-2024 10:46 PM | ||
04-15-2024 02:47 PM |
New to the community? Here's some information to help you get acquainted:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.