Hi All, This is my first laser printer after 2 other inkjet.I have some old pictures I want to print and look like a regular photo print.I have tried Kodak's photo paper(inkjet) and it looks good.I tried HP Brochure paper,glossy,and it looked like so...
My MF731C/733C has started to print black dots - evenly spaced when black is used across the page. I went through the various cleaning options. Not sure if I need to "shake" the black toner.
I have a Canon MF8280Cw connected wirelessly through wifi to my computer (Windows 10). I can print wirelessly with no problem, but when I try to scan (from the printer) to the computer, when I select "computer" it keeps asking me to connect to the c...
My prints always have approx. 1.25 ins. of vertical lines on right side (long side for both portrait and landscape printing).. First inch towards right they are black, dark, light, dark, light, etc., approximately 1 in. each. Last .25 in.,approxima...
After a power outage the printer is basically dead. No lights on any button & the display is blank. I've tried shutting off then on. Unplugged & replugged the cable. In the control panel the printer was offline so put it online. Docs just get added t...
Help! it stopped copying-- just sits and spins, light flashes-- nothing!! I tried installing the new driver on my mac-- now what?
I have a Canon Mf229dw and cannot connect to the network when the wireless AP has 5g band steering enabled. When that option is disabled on the AP, the printer can immediately connect and get an IP address.Can anyone chime in with their experience on...
Our Canon IPF8100 printer keeps showing the following error message: "Execute printhead cleaning. If this message is still displayed, replace printhead L." After executing several printhead cleaning procedures and even replacing printhead L twice (!)...
Hi everyone, I notice there isn't a place really for questions about Canon scanners, I hope I'm in the right place. I have been searching for an answer regarding red, blue, and green streaks left on the digital images scanned with our Canon G1100 sca...
I keeping getting a black line down the page no matter what I do. I have cleaned the glass, changed the ink cartridge, ran the cleaning program through the menu screen. The line shows up not matter what I do. HELP! I have a canon imageclass MF4890dw ...
Hi, We recently purchased the Canon iR-ADV C5550 for the office. Printing over the network/wireless and scanning to USB are all working as expected. However, the scan and send to email, previously working, has stopped working recently. When users att...
I changed the toner cartridges in my 8580Cdw and now it prints very light and the magenta seems to pring lower than the lines of text causing you to think you need glasses to see it clearly. What causes this and how do I fix it? I have went through t...
The printing function works right. When I I try to scan or copy, it only output a blank page. Any suggestion? By the way, why my post were deleted?
First time here! Need to find how to continue or override end of roll stops printing even though there is at least a 18" left on roll and only 2 inchws left to print. Becomes expensive on a 6 foot print:( Johnbeta
Good morning all -- I'm attempting to program a print job -- I have a multiple-page PDF document, and I want to insert sheets from 5 different paper trays. But when I go into program the job, I se the first insert from Tray 1 -- when I set the second...
| Subject | Author | Posted |
|---|---|---|
| 12-27-2025 06:48 PM | ||
| 12-23-2025 03:54 PM | ||
| 12-23-2025 09:16 AM | ||
| 12-20-2025 12:54 PM | ||
| 12-15-2025 02:19 PM |
New to the community? Here's some information to help you get acquainted:
12/18/2025: New firmware updates are available.
11/20/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
