Office Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

MF733Cdw Message: "Correcting... Wait a moment."

I have a brand new MF733Cdw. Probably less than 10 pages printed.  I've seen this message at least 3 times after printing a document.  "Correcting... Wait a moment." Is that anything I should be concerned with?  If it's indicative of a problem or pen...

Printer Cartridge

I was sent here instead of having my comment answered so...I bought a 137 cartridge to use in my printer. Canon cartridge in Canon printer. Correct cartridge. When I opened the sealed box and sealed wrap I looked for the ring to pull on the side and ...

Zoimom by Apprentice
  • 1313 Views
  • 7 replies
  • 0 likes

Shared printer only prints after loca job

I have a printer set as shared and it's connected to a PC I use as a server running windows 8.1.I can print from the computer all the time, but I can't print from another computer until I do one print job from the computer it's connected to, then all...

GRPC by Apprentice
  • 1240 Views
  • 5 replies
  • 0 likes

Resolved! Maxify MB5320 keeps rebooting.

I have two Maxify MB5320's and both are constantly rebooting.  I tried all "cures" posted on the web and nothing works.  What did you do, Canon?

bjm1 by Apprentice
  • 2465 Views
  • 10 replies
  • 1 likes

Canon Printer making noise

My printer is making a lot of noise without giving any commands. I have restarted it, plugged it out and plugged it back in, ran a troubleshooter also but still doing the same. Please if I can get the call support number. I am using this for work. J ...

Resolved! Canon maxify mb2320 wont stop power cycling

Hello all,First I want to say thank you for taking the time to read this message, it means a lot to me.My question was for my Canon Maxify Mb2320. A week ago it was working fine, now when I start it, it will not stop power cycling. Once you press 'On...

Cannot Connect MF644Cdw to Mac Via USB

I have a new Mac mini running Monterey v12.4. I want to connect my MF644Cdw directly to the computer using USB but nothing I have tried works.  I have tried going to the Menu - Preferences - Network - Wired LAN on the printer and it indicates is succ...

dws2006 by Contributor
  • 2333 Views
  • 3 replies
  • 1 likes

MB2320 Intermittent off and on

I have seen solutions requiring LAN hard wire connection but that isn’t a solution option for me.  I must have WI-FI connect.  At this point I can’t print…have tried a “hard reset” from internet directions, to no avail.  To make it stop turning off a...

Resolved! Maxify MB2320 has a mind of it's own!

My Maxify MB2320 has started to do things all on its own. It will not boot up. It only goes as far as turning on, showing only the word Maxify on the display screen, the paper feeder spins and spins, the triangle light goes on and then it shuts off. ...

aud425 by Apprentice
  • 905 Views
  • 1 replies
  • 1 likes

Need Tech Help

My Canon MAXIFY MB2320 is malfunctioning as follows: (1) Power light blinking continuously (2) Display screen reads "MAXIFY" (3) printer spits out blank paper continuously (4) Printer is recycling continuously. Tried rebooting, tried hard resetting, ...

KEITH77 by Apprentice
  • 507 Views
  • 1 replies
  • 1 likes

MS Word table on 3x5 card not respecting standard margins

In MS Word 2019, I created a landscape table on a 3x5 card.  I've used the Word narrow margins to be sure I was not using too much space.  In print preview, the card looks fine and centered all the way around.On my Imageclass MF644CDW, I registered t...

hookedup by Contributor
  • 2285 Views
  • 9 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements