Resolved! imageCLASS D320 Error TRAY:FREESIZE
My Canon ImageClass D320 show an error message of: TRAY:FREESIZE. Nothing has worked to reset this, please help
Posts
imageCLASS MF743Cdw Mac Cannot Find Scanner
This is a new installation on a Mac PowerBook Pro with M1 chip.OS version is Ventura 13.1Downloaded lastest drivers and utilities from Cannon:mac-scan-v21511-00.dmgmac-UFRII-LIPSLX-v101913-10.dmgInstalled drivers and set up all-in-one to work wireles...
MF726CDW - Cannot connect to LAN
I lost my LAN connection due to a power failure and I cannot reconnect to my Netgear R7000 router. Select LAN Connection is grayed out and Direct Connection is enabled. For some reason, the blue wireless light is off. I have tried to restart the prin...
Color Image Class MF8580CDW Printing magenta vertical line on left side
I recently put new authentic Canon toner cartridges in my Color Image Class MF8580CDW all in one printer. Initially the color was out of alignment so I did Color Correction to fix it. But after that it started printing a magenta vertical line on the...
MF269dw will not install via Network Connection
I have the latest driver for the MF269dw for Windows 11 (MF260MFDriverV6101WP.zip) and have the printer properly configured for network printing, but the driver will not install. When I get to selecting USB or Network, the installer cannot locate th...
LASER SHOT LBP2900B Not Working After Salesforce CRM Tool Update
Hi,I am explaining the complete scenario-I am writing to seek assistance with an issue I am currently experiencing with my Canon Printer, which has recently stopped working.Before detailing the problem, I thought it would be relevant to note that the...
MAXIFY MB2720 Print History
How do I find my Print History for my MB2720? Thank you.
Color imageCLASS MF743Cdw unable to color scan checks
Hello,I am attempting to scan a check for record retention purposes. When i scan a check every 1/8 or so is blank followed by 1/8 of the image repeated. Is this some sort of security mechanism with the scanner? I did not have this problem on my old H...
Canon Maxify GX4020 automatic duplex problem - error code 1304
I purchased the GX4020 in May 2023. When I print from my computer using automatic duplex, occasionally the GX4020 prints side 1 but does not grab the paper to feed it back into the printer to print side 2. Instead the GX4020 spits out side 1 and gene...
MAXIFY GX6021 Administrator Password & Hardware Reset
My printer's physical screen is stuck on Administrator and I can't get back to the home screen unless I put the password in. I tried the serial number for the default and I tried Canon but neither works. The message says that password is invalid. I p...
ImageCLASS MF4770n Scanner does not work - MacOS Ventura
My Canon MF4770n Scanner stopped working for unknown reason. When I click MF Toolbox on iMac, it starts but then quits right away. When I try to scan from the printer, the printer tries to connect but after a minute it says "an error has occurred".T...
imageCLASS MF641Cw Scan to Email Prints a TX Report Instead
Hello dear ,i use canon MF641C printer, i want to configure scanning to email, but when i scan to email it print a TX report, there is nothing wrong with the configuration i have other printers that use same configuration and work. my email is office...
Toner Cartridge Door Will Not Close
Have an app. 3 week old Image Class MF269 DW multi-function printer. To clear a paper jam after trying all Canon methods, I removed the Drum and then the Toner cartridge and was able to pull out the paper. The problem now is that after following th...
Canon LBP223dw - how to turn off cartrige error message
Is there a way to turn off the message on start that says "Error connecting to cartridge, it is possible it's a counterfeit..."By pressing OK it goes away, but can it be disabled entirely?Canon Genuine Mode is disabled.
Can't Scan from MF236n
Hello,I can't scan using the buttons on the MF236n. I have gone into Scan Settings, and entered shortcut key settings,register, scan >PC1. Selected USB Connection, and B&W Scan. The screen "settings applied". However, when I go to scan, it says...
