General Discussion
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Items lost in the field

Well, **bleep**, I "lost" a circular polarizing filter in the field yesterday morning. What's worse is that I wasted an hour of good eary-morning light by the lakeside retracing my steps trying to find it, to no avail. It was a 67mm Tiffen, the first...

John_SD by Whiz
  • 4274 Views
  • 21 replies
  • 0 likes

CanoScan N67OU drivers for Windows 10 64 bit

The Canon site https://www.usa.canon.com/internet/portal/us/home/support/details/scanners/support-scanners-canoscan-series/canoscan-n670u/canoscan-n670u?tab=drivers_downloads says There is no driver for the OS Version you selected. The driver may be ...

Yabzab by Contributor
  • 4239 Views
  • 2 replies
  • 0 likes

Washed out scans using MP Navigator EX in Windows 7

There doesn't seem to be a specific forum for scanners so I'm posting my question here.  Using MP Navigator EX 2.0 in Windows 7 32 bit, when scanning either PDF or JPG with the scan type set to magazine, the scan mode set to color, and with the defau...

xode0000 by Apprentice
  • 6653 Views
  • 7 replies
  • 1 likes

Site still down?? (iMage Gateway)

I'm trying to figure out why the iMage gateway site is still down. I understand the need for periodic maintenance down-time, but it's been a couple day now.  Suggestion: one the "site down due to maintenance" page, put a countdown timer or even a tim...

Rondodog by Apprentice
  • 7731 Views
  • 6 replies
  • 0 likes

Resolved! Warrantys and 3rd party repairs

The 1975 Magnuson-Moss Warranty Act states that no manufacturer who charges more than $5 for a product can put repair restrictions on a product they're offering a warranty on. In May, the U.S. Federal Trade Commission sent warning letters to Sony, Mi...

Firmware 2.020 Release Notes

Does anyone have the location of the release notes for the new firmware update? I’m curious if Specter/Meltdown/KRACK vulnerabilities have been patched.

Printing quality

Hi, just recently had interest in someone buying one of my photos. I've never done this before and I'm wondering how this will look. My photo is 6000x4000 pixels and 240ppi. Will the quality be good enough to print on plexiglass at 80cmx60cm.I've nev...

jmark by Contributor
  • 4358 Views
  • 7 replies
  • 0 likes

Is there a Printer from Canon like One from HP Tango?

Hi Guys, I am looking for a smart home printer from Canon. I already have a Canon printer at the office but looking for something small for my home. Something like the HP Tango? that can work with Amazon Alexa and other devices and of course offer wi...

prateekm by Apprentice
  • 2105 Views
  • 1 replies
  • 0 likes

Error 4102

can i ask if this issue already solve? regarding error code4102 .still i cant print photo using A4 size it keeps the error occurs says: incorrect media type and paper size. i did everything i can do and steps to make in other site but still the same ...

Mirrorless and card slots

Hey everyone! I just held the EOS R in my hands today. Really cool camera, but this and the Nikon FF have been getting a lot of criticism for only having 1 SD slot. Part of me wonders why Canon and Nikon wouldn't put a micro SD card slot on their FF ...

Esteemed Contributor perks at Canon Balloon Fiesta

I know that I am in a unique position to enjoy this 8^), but why not have some special stuff for any Canon Community contributors who visit the Canon booth at the Balloon Fiesta. For example, a session with Ken Sklute or to meet Rudy Winston, or even...

Weekly Canon Photo & Video Show

Please use this thread to post the image and videos you've taken this week, for other Canon enthusiasts to enjoy. Feel free to post your gear and/or settings used, too. This thread is intended to help keep the sub clean of "photospam" by popularity-s...

Shortcut keys to give command to print

I took amazong pictures with my canon camera and i want to print them but don't know how to print. I have connected my camera with printer, somebody please tell me the shortcut keys to give command to print.

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!