General Discussion
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

GP-E2 GPS receiver stopped working

Worked fine previously. Now unit does not stay on. When switched on, power light gives one long flash, gps light gives 3 short flashes, then nothing. No lights, camera doesn't see unit in hot shoe and computer doesn't see unit on USB.

AheadAir by Apprentice
  • 2234 Views
  • 7 replies
  • 0 likes

WB setting?

I have taken some photos where LED lighting is used. What setting, besides Auto, is used or best? Thanks two bunches.

Auto white balance lock

Dear All, For many years I have been using manual white balance for video. I find it extreamly inconvinient if you are making outdoor movies. It is not always practical to carry a grey card and set the custom white balance. I can see that Canon recen...

amukher by Apprentice
  • 3359 Views
  • 5 replies
  • 0 likes

CanoScan LiDE 400 - Scanning empty jpeg

My CanoScan LiDE 400 was working perfectly a few days ago. I went to start scanning again with the Canon IJ Scan Utility Lite, and it now scans an empty jpeg with zero bytes. I tried uninstalling the software and turning off my laptop and restarting ...

Camera Theft

As cameras become more expensive they also become targets for thieves, and some of those can be quite violent.  The following video came to my notice via the Northrop You Tube site.  Camera theft, like many other possessions, is not new, but the pote...

DR-G2110 Scanning Issues

I have two DR-G2110 scanners with issues.  One has a screetching/grinding sound coming from the top end when in operation.  I've replaced the roller kit and cleaned every roller with rubber rejuvenator but the upper unit still makes this loud noise. ...

Scanshift.JPG

Resolved! Quick Menu Bar screen location problem

Recently the Quick Menu Bar moved itself to middle of my screen. It once resided in the lower LH corner. How can I move it back to the corner? Operating system is Windows 7 using screen resolution 1366 x 768. I have not made any changes to display se...

canonlide 120 driver

I have misplaced the CD for my scanner and can not seem to be able to download the divers. Is it me or is there another problem I am not aware of relating to these drivers?

Greg11 by Apprentice
  • 825 Views
  • 1 replies
  • 0 likes

CanoScan 8400F power supply

Hihope someone can help i'm looking for a power supply for CanoScan 8400F i did a clear out and think it ended up in the recycle centre  see link of scanner belowcheers scanner link 

34cata by Apprentice
  • 920 Views
  • 0 replies
  • 0 likes

White balance settings?

Couldn't find the dog show photo. Someone edited it with proper WB. Is there a rule of thumb for setting WB or set to Auto? I had used the shade icon as the exhibition center is shaded but open sides and artificial lighting.

MP25-D always prints item number

I have a Canon MP25-D printing calculator that just started printing the item # for each entry on the far left of the paper. This was after changing the ribbon. I have made sure the Off/Print/Item switch is set to "Print". Any ideas as to how to tunr...

Posting section

I have a question I would love to post. The only tab that has a "NEW MESSAGE" button is "GENERAL DISCUSSION". I have read the replies from the other people having similar problems but the directions were inaccurate. Am I completely intellectually inc...

Drbrown by Contributor
  • 10389 Views
  • 22 replies
  • 1 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements