EOS DSLR & Mirrorless Cameras
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Resolved! Firmware Version EOS Rebel T3

Hello I have owned an EOS Rebel T3 (not i) for quite a few years and have recently been trying to update the firmware but have encountered a problem that has baffled me (perhaps it's me!). When I follow the clear instructions on the Canon site, I sto...

R5 focusing on small objects

Hi,This is an improvement suggestion.I recently purchased Canon R5 and while I find many features of it are great focusing on small objects could have been better.By small objects I mean small birds like pardalotes or gerygones which may only be 7cm ...

Cutter by Apprentice
  • 3041 Views
  • 5 replies
  • 0 likes

Switched to R6, best part was unexpected

Sold off my 6D Mark II and switched over to an R6. Tonight was my first actual use of it - and went great. Eye tracking is the real deal. Every. Single. Image. Was in focus. Normally I’d have quite a few throw aways with soft focus or missing the eye...

Can't get video off of card

I used a Scandisk Ultra Plus card to capture video. The video is on the card and I can watch it on the camera but can not get it off the card. I believe it is not the correct card for capturing video but still the video is there and I need it. There ...

J1mmer by Contributor
  • 5387 Views
  • 8 replies
  • 0 likes

canon 70d red noice

First, I apologize for my bad English. I got a gift for my birthday Canon 70d, and then I noticed there was a problem. In dark areas or poorly exposed areas makes this a problem. These are original files without processing. I shot in RAW the same pro...

canon.jpg
ash92 by Apprentice
  • 1693 Views
  • 2 replies
  • 0 likes

HDMI out stopped working 90D

I have anew 90D I'm using for live streaming along with my 80D. I've been using USB for video out and it's been fine. I thought I'd try using HDMI since it's supposed to be better quality. Yesterday I connected a new HDMI mini to HDMI to my 90D and m...

noise triggers

I'm trying to video noisy cars, trucks and motorcycles on my street and need an inexpensive system which will work with a point and shoot camera. Canon M10.  Cannot be motion sensitive, noise only.

EOS 20Da info

I need some help in filling in specs for astrophotography.  What is the pixal size on the cmos, 6.42x6.42um? What is the d/a bit depth, 10,12,14?I'll start with this.Thankspeter

My Canon 6D mk2 will not format CARD

I have four SD cards, Sandisk of various stripes, 128 through 16G.  Today when I went to the camera I got the "can't access card, format card or change card" message. No ERR, just that.  I've done all the possible research and haven't found a solutio...

artrosch by Apprentice
  • 8699 Views
  • 17 replies
  • 0 likes

Resolved! t7i & off camera lights?!?

Hey Hey!  We have a t7i we are trying to use for a photobooth.  We're attempting to connect it to an AlienBee strobe with, with a hotshoe adapter and a cord. However, no matter what adapter or cord we use, the camera WILL NOT trigger the flash.  The ...

IMG_7465.jpg

cannon rebel t7 no image and no auto focus

auto focus on, quick mode.. Image in lcd has focus points showing, but there is no auto focus when shtter is pushed halfwauy. pushed all the way shutter works..  press review it says "no image".  worked fine the last time I used it. setting is on all...

Rocks by Apprentice
  • 2393 Views
  • 4 replies
  • 0 likes

60D with No Power.

I have a Canon 60D that I use for Professional Photography. Yesterday after a full day of shoots, my camera turned off mid shoot, and will not turn back on. I have changed batteries to see if it was an issue, but nothing seems to help. It is complete...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements