Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

MF4150 problems

My small office has a laptop running Windows Vista and a networked desktop with a Canon MF4150 connected.  When the desktop was running Windows XP, we had no problem with scanning or network printing.  After the desktop was upgraded to Windows 8.1 re...

PIXMA MX922 - no scanning software coming through

I recently purchased a Canon PIXMA MX922.  I have installed all the drivers and software advised on the Canon website.  I am running on Windows 7.   When I open the Quick Menu, there is a horizontal area for the Scanner, but no icon links to function...

DoulaMN by Apprentice
  • 6899 Views
  • 3 replies
  • 0 likes

Scanned PDF tries to connect to internet?

I'm using the MX455 and recently i've been looking into the different features it has. I've used the 'scan to usb' function on the scanner, and it scanned my photo to a PDF file (no jpg option, apperantly?). Anyway, I've put the stick in my computer ...

mataku by Apprentice
  • 3707 Views
  • 0 replies
  • 0 likes

Canon Pixma MG3120

Can anyone adivse I cannot for the life of me install the MP driver ...... I have downloaded the MP driver from canon website but when I try to install it. Right away pretty much it just says MP driver not installled. I'm running Windowns 7 (64) same...

Mikey69 by Apprentice
  • 4289 Views
  • 0 replies
  • 1 likes

canon MG3120

I have a canon MG 3120 running on windows 8. I am getting an error message for IJ network Scanner selector ex  stating this program is starting on a operationing system that is not supported. this program will be terminated. Is this fixable? also I s...

Easy-PhotoPrint Prints outside the CD.

I'm using a Canon MP640, and Easy-PhotoPrint to make CD labels. The problem is that it ends up getting printed outside of the CD, so half the layout will be on the CD, and the rest will end up on the tray. I've tried this on another mac with the same...

JHensman by Apprentice
  • 4089 Views
  • 0 replies
  • 0 likes

Mavericks MX860

One word: UNBELIEVABLE!!! I am a software engineer, and I cannot get my MX860 printing on the Macbook air latest model (2014).  I have also a Xerox installed, which just works, select IP fill in the IP address select the correct driver and works like...

Paintshop Pro can't detect MX870 scanner

I have a Canon MX870 printer which I use from a Windows 7 Professional system. The printer properties dialog says that the driver is "The Device Stage(TM) for Canon MX870 series Version 1.1.30." I got this driver from Canon's support site at the reco...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.