Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Scanning Problems?

I use canon e500 printer. when i try to scan using auto scan in my desktop. it says: cannot scan for these reasons 1.) scanner is turned off 2.) USB cable is disconnected Code: 5,156,61. I checked my USB cable and it is connected. I try to restart my...

PIXMA TS 5051 photocopy problem

I am trying to copy a 6x4 photo onto 6x4  (15x10)photo paper but for some reason the printer enlarges it cutting off approximately 8mm at the front but only 4mm at the back, bottom and about 3mm at the top.I have spent ages on line chatting to their ...

ChrisWe by Apprentice
  • 858 Views
  • 0 replies
  • 0 likes

Can't find printer/usb cable not working

I have a mac and a wonderful TR8520. When I open Printers & Scanners I can't find my printer. Wireless printers are not allowed to be connected on my college wifi, so I bought a usb cable to print that way. Now, the printer is connected, because I tr...

Canon TR8520 Won't Copy from ADF

My TR8520 Stopped Copying any sizes of simple letters and documents from the tray (error mesage) since months ago, though copying from platen glass has been OK. I can't figure out what went wrong. Anyone knows why and what the solution is? Thank You!...

RChu by Apprentice
  • 685 Views
  • 0 replies
  • 0 likes

Canon TR8520 Takes a Long Time to Print

I have a Canon TR8520 and it takes a long time to print. Once it prints.....the screen says "printing" for a long time.I open the printing page and it just sits there saying "printing" as if it is going to print. I cancel out the print job it just pr...

cward21 by Apprentice
  • 841 Views
  • 0 replies
  • 0 likes

Resolved! Cannon MX410 printer NOT printing black

Hello I have a Cannon MX410 printer/fax that does NOT print black text from my computer commands: * I changed both Color/and Black ink cartridges* it COPIES everything on the machine in both color/and black Thanks in Advance

Dempster by Apprentice
  • 8146 Views
  • 8 replies
  • 0 likes

PIXMA G5020 - repeatedly offline

I've had chronic problems with messages that say my G5000 series is offline. There is an annoying toast message popping up every 10-15 seconds or so, when I click on that, nothing seems to happen. I originally had it connected via WiFi, but in troubl...

G6020 Photo printing problem

Using canon plus glossy paper on a newly set up printer (works great printing documents),trying to print 4X6.  The image that makes it onto the paper is great;  however, nearly 1/2 inch on both ends of the photo is not printed.  Everything top to bot...

lpayne by Apprentice
  • 1007 Views
  • 0 replies
  • 0 likes

Printer cleans heads after each print

How do I stop the printer from cleaning the heads every time after printing? I saw something abouot this problem at one time but can not find it now. I think it is causing the heads to fail becasue they are cleaned to much and they start blurring the...

cal680 by Apprentice
  • 1401 Views
  • 2 replies
  • 0 likes

MG2550S driver installation issue

Hello, I have recently purchased the Canon MG2550S and am having issues with installation, the same issues whether using disk or downloading from web. The installation process is going ok then it asks you to connect up the printer which I do, it star...

ianowen6 by Apprentice
  • 1393 Views
  • 0 replies
  • 0 likes

Resolved! MX870 won't scan

I'm using Windows 10.  I changed my setup from WiFi to wired LAN (due to the fact that I had to keep getting up and cycle the power on and off just to print)  (it did scan before)  and ran the setup program.  The printer prints fine with no problems ...

Dorba1 by Apprentice
  • 4162 Views
  • 2 replies
  • 0 likes

PIXMA MX472 Scanner Error

Scanner error mesage: cannot connect ot scanner for reasons: - Scanner is turned off  - USB cable is not connected. I have replaced the cable, Code: 5,156,69 and still have the message.  Is there a manual scanner OFF button on the printer? I also rel...

bsralph by Apprentice
  • 1063 Views
  • 0 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements