I recently got the Pixma G620 printer. So I got a roll of photo paper to print some panorama images. I used Photo Paper Glossy II for media type setting, that works with my first image which is 8.5x19 turns out great. For my second image which is 8....
I have a Canon Pixma TS6320 and I'm trying to print stickers on A4 holographic paper using the silhouette program. I've done it before with the near same exact design with the same exact paper and had no issues expect for a few pauses here and there ...
What is the difference between these two printers?
My Canon MG 2522 is displaying a yellow solid light by Black ink when plugged in but won't respond to any button or computer. It wont even move the ink when I open the tray .I have tried unplugging and plugging back in with the same result and differ...
I will be donating my PIXMA MX882 and before I do that I want to make sure there are no stored scans etc in the printer. Is there any hard drive in this printer or any other kind of persistent memory ? Thanks
I am getting the error "cover open" on my Pixma. It will print after a long delay, but will not scan. I've closed and re-closed all the covers, unplugged it to reset it, and installed updated drivers without success. Any advice?
I'm scanning a document with multiple pages. front and back, using the IJ Scan Utility. The document is one that I've scanned several times recently, and the pdf was put into a single file. Now each page is put into a separate file. I recently got he...
Hello,I'm using MX495 print/scan/fax machine. when I scan pages using the auto feeder for scanning a few pages' some the pages are scanned OK but some of the pages are scanned upside down. It is not always the same page number like Odd or Even page n...
My TS 8320 printer won't print cd's anymore. I've unplugged the printer thinking it would reset with no luck. I've downloaded the drivers with no luck. I've tried several times to print a NEW blank CD-R WHITE INKJET cd. I load it in the multi-purpos...
This is teh MOST frustating thing. Have reserached this a lot. Removed the printheads and flushed with hot water for 10 minutes. Perfectly clean. Still does NOT print any color or CYAN. So when the original is color and I select black & white or gray...
Mac 10.13.6 system, using Canon Pixma MG7720. Occasionally I get prompts asking if I want to (re)install the printer software. Usually when I check it shows the printer is installed. Could this be caused by problems with the printer prefs? Or som...
First I did multiple cleanings, followed by multiple deep cleanings. Then I replaced all the cartridges with brand new ones. On the print test, all colors print fine, but not black text. Then I noticed that there are two lights on each cartridge (one...
Hello I am looking for help as I have a small Canon TS3160 printer which has always worked great and now all of a sudden it says there is a paper jam. I have looked inside the printer very carefully and cannot see any paper anywhere at all. Any advi...
Out of the blue, my MX472 has started sucking in the paper about halfway and then starts printing which then, of course, cuts off at the bottom of the page. I have followed instructions for realignment thinking that would've worked but nope. I'd be...
I have had a Cannon MX922 printer for years. I print back to back copies, i.e. 2 pages on the same sheet of paer, etc.. It used to print head to head, but now it does head to foot. I have now idea how it got changed. How do I change it back to printi...
| Subject | Author | Posted |
|---|---|---|
| 04-30-2025 07:36 PM | ||
| 04-30-2025 07:18 PM | ||
| 04-30-2025 05:49 PM | ||
| 04-30-2025 04:42 PM | ||
| 04-30-2025 03:06 PM |
New to the community? Here's some information to help you get acquainted:
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
