Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

fax tones when receiving incoming call on TR8520

Hello -I am using the TR8520 multi-function machine. Shortly after taking an incoming call I start receiving fax tones that make it impossible to continue the call. I have the fax set on telephone priority. The machine is plugged into one outlet of a...

bartab by Apprentice
  • 1419 Views
  • 2 replies
  • 0 likes

MX922

My printer is showing Support code: C000.  I do not have anything in the queue.

debmcwms by Apprentice
  • 859 Views
  • 1 replies
  • 0 likes

Resolved! Scanner software for Mac Mojave

I am running Mojave10.14.6MG PIXMA 6220Wireless Printing Printing functions works great but when bringing up the print que, I have two buttons, Pause. and Settings, on the left side of the print que but no Scan button on the right side.  This is how ...

dog by Apprentice
  • 1502 Views
  • 2 replies
  • 0 likes

Pixma MG3620 issues

We recently returned south for the winter, and started having print quality issues -- out of alignment, partial printing, etc.  We replaced the print cartridges but we're still having problems, so I tried to print an alignment page. After printing ab...

JReed by Apprentice
  • 915 Views
  • 1 replies
  • 0 likes

Resolved! splitting images in canon ts8320 scanner

I just installed my new Canon Pixma TS8320 and it's working fine. Except the I want to scan several photographs at one time and have them automatically split into inidividual photos, rather than what I'm getting, which is one global scan of all the p...

MX922 error code 5101

We changed out the formatter circuit board on our MX922 machine but when we turned it back on, we are getting a 5101 support code - which says to remove a piece of packing - but that packing was removed when we got the machine new.  Is is possible th...

Pixma MG5770 Printer Ink in the USA

Hello all, New here. I purchased a Pixma MG5770 in Singapore. I have moved back to the USA and I am trying to see if there is a cross-reference to the ink cartridge numbers so that I can purchase ink in the USA. I have an immediate issue as I need a ...

Resolved! PIXMA MX532

During the printing process of my brandnew MX532, when the sheet is coming out step by step, close to the end of the sheet the printer is going backwards for a short moment, after this the printer runs forward again and finish the print. The printout...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!