Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

MX860 driver for Windows 10

Hi,I have a Canon MX860,  When I bought a new computer with the Windows 10 operating system I could not print and when I looked on the Canon site I was told that the printer was retired and the driver is not available.  How can I get a driver for the...

PIXMA MG5650 Error 5011

It’s seem after reading the comments quite a few are experiencing the  Same problems as me that error code 5011its a question that I have used 5 sets of cartridges as I don’t use it a lot, what a disappointment that it has developed a fault after so ...

Grayus by Apprentice
  • 104 Views
  • 0 replies
  • 0 likes

MG 6620 black only print is blurry

I added paper at the same time my printer was trying to pull in a sheet of paper to print on and it grabbed about 10 sheets of paper. All pages came out together like they were one sheet of paper.  After that happened, the black print coming from the...

lrkuta by Contributor
  • 2183 Views
  • 2 replies
  • 0 likes

Pixma G7020 Stops Printing

I just bought this printer and hooked it up.  I am using Debian Bullseye with Xfce 4.16.  I loaded the Linux software that was available for download.CUPS sees the printer and it printers nicely.  The scanner software on my system finds the printer a...

KitchM by Apprentice
  • 154 Views
  • 0 replies
  • 0 likes

Canon G3010 does not print black properly

Good night, everyone. Recently, my canon G3010 began to not print black properly, leaving many blank lines and missing text. However, it does print perfectly in Photo Paper Glossy or Photo Paper Matte or even if i use the "Save ink/toner" in Adobe. H...

PIXMA TR4722 False Paper Jam Message

my tr4722 printer wont work. It says there is a paper jam, but no paper is in there. I took it completely apart this past weekend, and when i went to print something two papers went thrugh and came out just fine. Now it keeps sayig paper jam.

Resolved! MG2522 print alignment problem

I changed the color cartridge and then I printed out a picture just fine which message said I could do. Then a link was provided to run the print head alignment process which I did. I believe the error message that then came up was 29. This whole pro...

PV2 by Apprentice
  • 315 Views
  • 2 replies
  • 0 likes

ink on skin

My printer pixma TR8620a needed blue ink. I took off the cartridge  plastic and wrapper and installed the new blue ink cartridge. Found blue ink on my fingers. Wouldn't wash off, vinegar didn't work, paint remover wouldn't work, paint thinner no, alc...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.