Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

iP8720 on OS 12.6 Drastic Magenta cast

I am trying to print through apple pages and all my photos come out heavily Magenta. I have printed a test page and all nozzles seem to be printing fine. Have checked ICC profiles and they seem to be correct as well.Have read a lot about double color...

MG7720 print is blurred

The characters are blurred. When viewed with a magnifier there are double characters offset slightly.I have tried alligning the print heads with no success. There is reference to aligning the heads manually but I could not figure out how to do this. ...

ka6uup by Contributor
  • 3143 Views
  • 6 replies
  • 1 likes

Pixma ip7220 Error code 1403

I have had an ip7220 for 5 or 6 years that I use to print CD/DVDs and color photos.  It has worked very well until I got an error code B200.  From this forum I found that it meant that the printhead was the problem.  I removed the printhead, cleaned ...

hickeytp by Apprentice
  • 103 Views
  • 0 replies
  • 0 likes

PIXMA TS202 Won't Print 5" x 7"

Good morning.  I purchased the above referenced printer after verifying that it did indeed have drivers for my Operating System.So I am running Zorin OS Linux Operating System which is based on Ubuntu Desktop.  I installed the CNIJ drivers downloaded...

npegler by Apprentice
  • 121 Views
  • 0 replies
  • 0 likes

MG2522 wont print last line of document

Hi all, I'm new here and i'm having trouble with my new pixma mg2522. I've been trying to print a document that is the standard size 8.5 x 11 and when it prints it is cutting off in the middle of the last line of text on the page. The formatting is t...

jory1978 by Apprentice
  • 6811 Views
  • 6 replies
  • 1 likes

PIXMA TS6220 Won't Turn Off After Power Outage

my PIXMA was turned on, and working fine, we had a power outage due to wind, when power came back,  my PIXMA was On - light was green But it will not turn off. It is stuck in the on position. I have unplugged it from the back of the printer as well a...

Ljcopple by Apprentice
  • 139 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.