I try to scan from my (soon to be returned) Canon MG7520 printer and it starts to act like it is scanning, but it doesn't. What might be wrong (i use a mac with yosemite.)
My IP 4500 is printing lighter than the screen image. I've run the cleaning tool and the nozzle check is OK the colour of grass is too yellow and the picture looks washed out. I've used this printer for some years and have had no problems but now I'm...
Most of the time, when I scan a document with the Canon MG7520 (especially in auto mode), it scans the whole platen, not just the document. Is there a trick to getting that to work more often? (I'm using a Mac with the Yosemite operating system.)
Hello, I have both an i865 and an iP4000 which have the same 5 Inks and Printhead unit. I understand that for printing A4 Black only (Greyscale) sheets, that just the large 3E Ink Cartridge is used. On an iP4000 just bought second-hand, I found when...
I know I can increase the DPI past 600 with the Image Capture program (I'm using a Mac with Yosemite), but I'm not sure how I can do it on the Canon software.
I have an MX722, with error code 6000. Have powered down and unplugged. code won't clear. what now?
Printer keeps giving a "no paper" message about upper tray when lower tray is full and is from where I need to print. Is there a way to override the message? Will it always be doing this or can I select the paper tray at when selecting "print"?
Hi I've just reinstalled Windows 8.1 on my Acer laptop and wanted to install the printer on it.I've downloaded the "MP980 series Mini Master Setup (Windows 8.1 x64/8 x64/7 x64/Vista64)" and the "MP980 series MP Driver Ver. 1.03 (Windows 8.1 x64/8 x64...
I have a Pixma MX882 printer that has been having problems lately. When printing straight lines, they are coming out stepped or jagged. This seems to be particularly noticeable when printing horizontally or landscape. If I print a shipping label f...
Have MG5420 and am unable to scan. Running Yosemite 10.10.2 have downloaded and installed driver to my HD. User WiFi set-up no USB.
How to print roll of paper w 25mm/ h 5000mm or similar format on Canon pixma ip7250.Costum max dimension does not allow .
I have code 1312 that i cannot clear, there is no paper stuck in the machine, did anyone run into this before any advice would be appreciated thanks.
Hi, haing recently moved from Australia to CT I purchased replacement ink and inserted the cartirdiges. Whilst the actual cartidge numbers on the pack were different to those used in Aus, the pack had MX870 as being supported on it. The printer state...
| Subject | Author | Posted |
|---|---|---|
| 04-30-2026 09:07 PM | ||
| 04-30-2026 08:02 PM | ||
| 02-25-2026 05:12 PM | ||
| 02-03-2026 03:40 PM | ||
| 01-29-2026 08:25 AM |
New to the community? Here's some information to help you get acquainted:
03/17/2026: New firmware updates are available.
SELPHY CP1500 - Version 1.0.7.0
01/20/2026: New firmware updates are available.
11/20/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
7/17/2025: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.