Camcorders
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

Syncing three XA11s for simultaneous start?

We shoot a show on classic car restoraiton and run three Canon XA11's  that are generally no more than 20 feet apart. Is there any way to start all three cameras at the same time? Right now we do a "3-2-1---AND" count down and start. Obviously that l...

Canon XA20 built in mic controls "dark"

Hey folks. i am wanting to remove my handle and utilize the built in mic on the camera. When I do so, I am getting audio recording capabilities but when I goto the built in mic settings on the touch screen, they are all dim and there is no control. C...

Resolved! MD160 - Can't capture video on pc & unknown red blinking light

Hi all, I opened my camera Canon MD160 after a long time, connected via firewire with my pc and tried to capture video on premier. I opened the capture window tab of premier, the "stop, play, rewind" buttons are working (hence there's no  connection ...

Rotation of 20180809_130635.jpg Rotation of 20180809_130635b.jpg Capture.JPG
krisk by Contributor
  • 5787 Views
  • 8 replies
  • 0 likes

VHS to dv avi file with elura 90

how do i set up the camcorder to copy VHS tapes to DV AVI ?i have the 3 red, yellow, white to one plug STV-250N? going from the out of the VCR to the camcorder.the DV cable (firewire??) from the camcorder to the windows computer.the camera is connect...

anon125 by Enthusiast
  • 4683 Views
  • 9 replies
  • 0 likes

Canon HFG20 blue bluish tint

I've had my camera for a few years, I shoot youtube videos in the same space every time.Lately some of the videos have a blue cast tint to them.It doesn't happen consitently only on some videos.All videos are shot in the exact same environment.The fi...

vickie_v by Apprentice
  • 5042 Views
  • 10 replies
  • 0 likes

Zoom problems with G30

When I zoom out with the rocker switch on my G30, the zoom will return to a wide angle, especially if I lightly touch the telephoto end of the rocker. It will continue to return to wide angle by itself, even if I move the rocker switch to telephoto. ...

mimages by Apprentice
  • 11398 Views
  • 14 replies
  • 0 likes

Vixia HF R62 - transferring to laptop VERY slow

Hi! I have a new laptop (HP Spectre, Windows 10) that only has a MICRO SD slot. My camcorder, Vixia HF R62, currently has an SD card. According to the manual, I can only use SD cards. (It doesn't say it explicitly but it implies / and my first attemp...

heyroll by Apprentice
  • 2533 Views
  • 1 replies
  • 0 likes

XF205 out zooms automatically?

Hello everybody, I recently purchased the Canon XF205 and had some troubles during a shoot. When I was recording and zoom in to get a nice close up of a plant and hold it for somewhat 5 seconds, the camera slowly zooms out by itself. I though it was ...

rockz0r by Apprentice
  • 8969 Views
  • 7 replies
  • 0 likes

RE: G30 Freezes While Recording

Has anyone  encountered a G30 locking up in recording mode? Won't zoom in or out, won't stop, or even power off. And the only way to get out of the locked up state is to remove the battery, then put i back on, to reboot the camera?

Sound Issues on Legria hfG10

Inspite of two returns to Canon to address this issue it still remains. Each time i press the stop/start button when videoing the camcorder registers a click noise.Does any one else have the smae problem? is it normal? Please advise Ray from England

Mufinman by Apprentice
  • 2130 Views
  • 0 replies
  • 0 likes

Vixia HF R82 menus do not match manual

I have a new HF R82 running 1.0.0.0 firmware. There do not seem to be any firmware upgrades, but my menus definitely do not match the manual I downloaded labeled 280HFR800K.  I am trying to upload files via WiFi to an Access Point. I configured the a...

mbeckman by Apprentice
  • 3200 Views
  • 1 replies
  • 0 likes

Charging Vixia HF R500

It appears that the charging port is damaged.  The camera works fine with a charged battery.  Is there another way to charge the camera/battery?

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements