Canon XA40 initialisation
When doing an SD card initialisation (in camera) is there a way to do it without erasing all the video clips as well? Thanks for reading.
Posts
HFR800 for FB streaming
I just bought an HFR800 and want to stream live on FB, however, my computer doesn't recognize the device through the HDMI port nor the USB port. Do i have to download some software in order for my computer to recognize the camcorder?
HF R70 no longer recognized using Transfer Utility
Ive Used Transfer Utility quite a bit with no issues (last time was in January 2018). I recently tried to use it and it does not see the camcorder.I've deleted the software and reloaded it from the website.Tried several USB ports, Two USB cords (incl...
Vixia R800 focus issues
I am having problems with the manual focus on my R800.I am teaching watercolor/painting tutorials on Zoom ,using the camera overhead.The focus seems good until I start drawing and painting and then everything goes blurry.The camera is about 3 feet ab...
Vixia HF R700 HDMI Black Output
I hope this is me being stupid and overlooking something simple. I am attempting to use a Vixia HF 700 as an alternate backup camera to my XA-15s. I am connecting to a HDMI video switcher. I am seeing auido input on the video switcher, but no video ...
Using Canon VIXIA HFM31 as webcam?
Can a Canon VIXIA HFM31 videocam be used as webcam? Have OSB software and HDMI video capture card. OSB software recognizes the built in webcam but not the Canon.
ZR930 DV cable
I have a ZR930 camcorder and want to download videos from mini DV tapes to my laptop. I can't seem to find a cable anywhere that will fit the DV port on the camera and has a USB connector on the other end. I called Canon and they were not helpful: ...
QU-32 Mixer to XA11 Camcorder Sound Difference
First of all, let me preface this post with the ‘I am an amateur’ tag:Due to COVID, my church is currently recording video/audio segments to edit together and make up our worship services. Our Allen & Heath QU-32 mixer is plugged into a Canon XA11 di...
HF G50 mic input audio hiss & artefacts
hi all -we just got a Canon Vixia/Legria HF G50 camcorder to to stream and record seminars. we want to take the audio from our sound desk (a Mackie 802VLZ4) into the Mic input, but so far I’ve been unable to make it work without a lot of hiss and a s...
Canon Vixia HF S20 - Battery Release Clip Broken
My camera was on the tripod and tipped over. It works, but it broke off the clip that holds the battery in the battery compartment. The support site says the camera is too old to be fixed.Any suggestions on getting a replacement part, etc?Thanks for ...
Resolved! XF400 issues outputting video to field monitors
I just got an XF400 a couple months ago at work and purchased an Andycine C7 field monitor to go with it. The issue I've been having is the HDMI signal will only output to the monitor at 60 FPS. The resolution, bitrate and filetype don't seem to matt...
Resolved! Canon XA 40 firmware problem?
I have just bought the above camcorder and trying to do a firmware update. I have copied the update to the SD card but the firmware tab in the menu is greyed out so can't update the camera. The manual says use slot B but I have tried both slots and n...
Vixia HF R52 Appears and then Disappears as soon as I plug it into any PC
I need to transfer my videos from my Vixia but every time I plug in my camera, the icon disappears and then it disappears a second later.I tried different USB Cables (long and short).I also tried plugging it into different pcs.All to no avail!
how can i use my canon vixia hf r800 with my i5 desktop ?
pengo video grabber is not giving clear videos why is that and what are the settings of the camera ? bought from B and H The basic Home streaming kit. my logitech C 922 pro give sme better videos with logitech capture I am so confuced ,I bought this ...
Transfer utility?
I have a VIXIA HF R50 camcorder. I haven't used it for a couple of years. I want to transfer some new video to my computer for editing in Pinnacle Studio. User manual says to use Transfer Utility LE. I have version 1.1.0 and used to use it. Info...
