I am going to purchase this camcorder but have some doubt about it's fan noise. One question is about it's value during recording. Another question is about an operation mode when a fan works. It's clear that the fan works at 4K 60(50)fps. But what ...
Hello Canon Community! This may be a long shot and I think I already know the answer of 'no' for this.Was wondering if there's any way I as the end user of a PAL XA11 can convert the system to NTSC. Appreciate any and all insight.
I thought this might be of interest to HF-G40/21 and XA30/35/11/15 users out there. Last Autumn, while out for 'lock-down' strolls in my locale, I took the opportunity to compare the Normal, Wide DR and Highlight Priority 'looks' (picture profiles) a...
The port on my Canon VIXIA HF R800 has broken. Is there any way to fix it without buying a new one?
Sorry for all the newby questions and I have read the manual before asking. When the XA40 is set to 'P' mode is there a way to see what settings the camcorder is using, preferably on the LCD screen?
Anyone know it is it possible to get the recording image rather than the viewfinder image? The knowledge base says yes, but the image shows two component terminals, while the camcorder really only has one. The purpose is to bypass the DV tape and rec...
I fully charge my batteries with the external Canon charger. When I check them with multimeter, they show a full 8V charge. When I put in camcorder, however, they drain in about 2-3 minutes. Then when I check the "dead" battery with multimeter again,...
How do you properly expose C Log 3 on the XF400/405? An additional external monitor with waveforms is not a viable option. The Zebras are limited to only 70% and 100%. Is it possible that Canon could add a waveform monitor or adjustable Zebras via fi...
Wondering if its normal or a defect? Thanks.You can faintly see it in this YT video- but the YT compression has mostly washed over it. The banding is vertical in the noise and NOT the circular banding around the moon. https://www.youtube.com/watch?v=...
We bought my nephew a HF R80. It worked well for a while, but lately it only records blinking noise. Here is an example video of the recorded noise (.mp4 file, 19 MB):https://ufile.io/fnh1iwbq It started doing that every now and then, but if you turn...
I have a ZR25MC Camcorder. It is quite old but works perfectly. I would like to transfer my recorded videos to my laptop computer and then burn a DVD for viewing on a big screen TV. Can anyone tell me what cable connection I would need to transfer to...
Our Church purchased a VIXIA HF R800 to record services and post on You Tube; Learning as we go; slowly making headway. Rigged up an external shotgun mic, which seems to work - but when I plug in a set of headphones to monitor audio input all I get i...
Greetings, I am new to the video world and have little knowledge when it comes to computers. I am trying to connect my Canon XH A1 to my HP Pavilion laptop so that I can convert the tapes into an HD card. Is this possible? I have the adobe cloud serv...
I have a 20-year old Canon GL1 Camcorder that I just turned on for the first time in about 18 years. There are a few MiniDV cassettes I have with recordings on them. What's the best way to get those recordings off the cassettes, and onto my compute...
When doing an SD card initialisation (in camera) is there a way to do it without erasing all the video clips as well? Thanks for reading.
| Subject | Author | Posted |
|---|---|---|
| 12-27-2024 07:58 AM | ||
| 10-21-2024 11:17 AM | ||
| 09-16-2024 05:35 PM | ||
| 08-13-2024 03:22 AM | ||
| 08-12-2024 07:23 PM |
New to the community? Here's some information to help you get acquainted:
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
