XF605 Timecode Doesn't Match Deity TC-1
Hello...I connected a Deity TC-1 to the timecode in and the timecode changed.The problem is that the timecode on the camera screen is 3-8 frames behind the generator.Anyone have ideas as to why?Thanks...JJ
Posts
Hahnel HL-A30 batteries (BP-A30 alternative)
Hey all, since batteries can be quite an expense, I thought people might be interested in my experience with Hahnel's alternatives to the BP-A30 battery (C70, C300, etc.).I've had one Canon BP-A30 and two Hahnel HL-A30s, and I've been using them, pre...
XF605 and Manfrotto RC Pan Bar EX LANC Remote Iris Buttons Not Working
I am trying to use the Manfrotto RC Pan Bar LANC Remote Control (MVR901EPLA) with the XF605, but the Iris + and - buttons do not work. I have two of these and neither works, so it is a compatibility problem. Are any steps being taken to fix this p...
Resolved! Internal CF Express card reader?
Is anyone aware if there are "internal" CFE card readers available to fit into desktop PCs (i.e. on a 3.5 or 5.25in panel); preferably with a SATA connection? There is only one internal reader (Startech) that even has SC UHS-ii, & that uses a USB3.1 ...
RC-IP1000 Remote Control auto tracking loses subject
we have the canon rc ip1000 and have paid for the auto tracking. one issue we have is when the auto tracking loses the subject it zooms all the way out. can we adjust this or stop it from happening?
Extra screws for the Canon (XA11 / XA15)
Hi everyone,I lost my screws in a few apartment moves, does Canon carry or sell these screws for the Canon XA11/XA15? Saw some on ebay but was wondering if Canon sells them directly. Could try B&H if nothing else right?
VIXIA HV20 How to connect to a USB port
I recently bought the item listed above on Ebay but my computer only has USB ports, not Firewire. Is there a cord that runs from the camera to a USB port - or some kind of adaptor - and, if so, could someone name the exact thing I should be looking f...
Resolved! Canon EOS R5C not connecting to FeelWorld 4K 7" monitor?
Hey!I just wanted to ask if anyone has experienced a similar issue and found a solution to this before I assume the mini HDMI port on my camera is broken (as it was working just a couple of days ago when I tested it last).Suddenly when I plug in my F...
Resolved! I made a BP-A30 battery grip for the Canon R5 C R5C
I made a battery grip for the R5C using the canon BP-A 30 batteries. Now I have 8k 60p no limitations, and battery anxiety is also nonexistent now . Also getting about 2 1/2 hours of use. Thought I would share this because if I can make this you can ...
Resolved! Transfer cable for Canon Vixia HF R800 video camera
Hello; I have a Canon Vixia HF R800 video camera which I have had for several years but haven't used. I recently charged-up the battery and shot some video, but do not have the IFC-300PCU/s USB cable that came with the camera. The original box is p...
USB charger for a BP-A30? C70 use.
I'm going away for 10 days without access to wall power and taking a decent powerbank 100W output etc.I can recharge that through USB access in the car I'm going to be in slowly. But I'm wondering if anyone knows of a way to keep the BP-A's charged t...
VIXIA HF R800 New BM Premium Batteries Drain Rapidly
So I have a Canon Vixia HF R800 camcorder. I have two current batteries which work fine...but I wanted 2 more as additional back-up. Just in case. So I bought the BM Premium 2 BP-727 batteries (which says works for canon video cameras like the one I ...
Connect an Audio Mixer Console to a Canon Vixia HF G70 mic input
I want to know if this can be done. I record a podcast with a Canon Vixia HF G70 camera. For the audio I have microphones connected to a Mackie Onyx 8 mixer. I connect the main output of the mixer (balanced XLR) with an XLR to 1/8" cable to the mi...
R5 C not working with Ninja V
I recently purchased the R5c and cannot get the ninja v controls to work the way it did with my r6. When I try and record raw it says there is no input. When I record on the ninja it records the screen on the R5c and shows all the screen settings on ...
It's NOT phantom power! It's BIAS power!
People keep using the term "phantom power" incorrectly when referring to a microphone with an external battery or needing low power from the source. The correct terms for just about anything using a 1/8" (3.5mm) jack (TRS or TRRS) are "BIAS POWER" or...
![616SYw5nBIL._AC_SL1500_[1].jpg](/t5/image/serverpage/image-id/26398i45BD4E513D150514/image-size/medium?v=v2&px=400)
