I have three 600 EX flashes, and one 600 EX II flash. After not using them for 2-3 months I pulled them out for a gig and two of them seem dead, and the other two are working but one is intermittent. I cleaned the contacts and tried new batteries. It...
Hi Guys, Have googled this and ended up confusing myself! Im in need of an off camera flash that i can use rear curtain sync with. Currently have a Yongnuo YN460 and rf603's that do the job but i need 2nd curtain sync capabilities. Any help?
Can the Speedlite 430EX III-RT be triggered by a third party RF trigger, and does it require a separate receiver to do it?
I have been getting blank white photos using my 430EX11 speedlight off camera. All I know is that i'm getting high exposure. How to do fix it? I've check the speedlight and it's telling me the setting is on ETTL, zoom--mm, and my camera is on auto se...
On attaching the 580EXII to camera T4i/650D the flash will not display ETTL mode. Camera Flash control menu (function settings/C Fn settings) displays incompatible flash or flash power turned off. However, if you change C.fn function 05 on the flash ...
Hi Hope someone can help I ma using the ST-e3-rt Trigger with 430 ex iii-rt and a 600ex, when i firen the trigger the 430 fire around a secound after the 600. I have turned off all groups except those that i am using as someone had previously sugge...
I have 2 430 EX's, and ST- E3-RT transmitter. All i use is the radio slave mode, firing with the transmitter. Frustrating, sometimes when i change batteries i guess, or out of the blue i can not access radio slave. It defaults to ETTL, i switch to M,...
would like recommendations for an external battery pack for a 580EX II. Any thougths on the Nissin PS8? Thanks
Canon you blew it on 3 things on the RT EX2! I thought you would revise the custom function to have the flash coverage (wider than normal, narrower than normal) to a menu item so it could be readily accessed. There are many times I could have used ...
I had been using a Canon 430 EX as a slave but it’s been stolen. Is it possible to trigger a Canon 580 EX if I use it as a slave and have a Canon compatible Sunpak 4000AF in the hotshot on a Canon 6d or 5d. Basically I'm asking, will Canon Speedligh...
I used to use my 580exII on my 5DmkII for events and the flash would send out a red focus assist beam. It helped immensely when working events at night. It doesn't seem to do that when I use it on my 5DSR and I just can't seem to get good focus in lo...
Hey guys, I love shooting with three Canon 600EX stobes, two on light stands, and the trigger unit on camera. This works great unless one or both of the strobes are in frame that fool the sensor into causing massive drop in light output from the main...
So I was on a shoot yesterday, everything was working fine, until suddenly the recycle time on my flash increased. Like I could normally shoot in burst and not have an issue, but now its like 1-2 seconds between charges. I also can't change the power...
Sorry, originally posted in the wrong forum. My bad. I have a T7i and three third party speedlites (Voking V580) that support ETTL and optical wireless triggereing. I am totally new to this so be gentle! I am trying to set up the three V580s as of...
I have 2 new 600EX flashes to go with my 60D. In reading the manual, it says you cannot use the flashes off-camera in RT mode with HSS. I didn't want to believe that so kept playing with things. It appears I may have found a way to do it but I wan...
| Subject | Author | Posted |
|---|---|---|
| 04-16-2024 02:55 PM | ||
| 10-09-2022 04:27 AM | ||
| 03-26-2021 05:45 PM | ||
| 05-16-2019 04:41 PM | ||
| 01-16-2019 04:37 PM |
New to the community? Here's some information to help you get acquainted:
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
