Showing results for 
Show  only  | Search instead for 
Did you mean: 

imageFORMULA DR-M160II ISIS Driver Error Message


Hello everyone, 

We are installing Scanner DR-160-ii for the user's laptops. Recently, we get the issue "An error has occurred with the ISIS driver. [Error:80FD13A6]. It still works with the DR-160 driver, the previous driver, but it cannot work with DR-160ii.

Please support. Thank you in advance!

Have a nice day!


Product Expert
Product Expert


Are the laptops running Windows 10 or 11? Also, please let us know if this error appear when scanning with CaptureOnTouch. 

We look forward to your reply. 


Windows 10, yes the error happens with CaptureOnTouch. So far, it does not work with many laptops.

We updated the last windows software, tried to install the driver from CD, or from Cannon website; log in with different users; changed different Cannon Scanners M160ii; re-installed driver.... The same issue. 

However, when we install the previous Driver (DR-160), the OneFormula software works well with the newer Cannon Scanner DR-160ii 

Product Expert
Product Expert


Please try the steps listed HERE to resolve the issue. 

If the issue persists, it is recommended that you call our Enterprise & Desktop Solutions Divisions at 1-800-423-2366 Monday-Friday 9:00 am to 8:00 pm ET, excluding holidays.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Thank ArthurJ very much.

We try it, unluckily, it does not work too.

At this point, we try to un-install DR-160ii driver, then install DR-160 on some laptops and they works. But we do not know it will work for all the rest users or not.



I am finding I have the same issue with a user, then was informed there are multiple of these scanner deployed and all get the ISIS driver error stated above. Windows 10 x64m I went back and installed the x86 driver as well incase the captureontouch will use the 32 bit driver. I received the same error. 


Just downloaded and run the tool below from Canon website as the result from Canon Enterprise & Desktop Solutions Divisions specialist, but it does not work too


I went to a person who captureontouch is working and got the version of driver and captureontouch and went to the other computer, cleaned off all driver and captureontouch. then installed the driver and captureontouch to the non working computer. It did not work.



driver 1.3.7488  X64

captureontouch x64 4.5.3021


windows 10 x64 21H2


With us, It still works with the DR-M160 driver (the software would be CaptureOneTouch-ImageFormula). But the DR-M160ii driver does not work so far on any laptops 😞

When I go to download the drivers, both model are listing the same driver version. I am assuming the drivers on the website are now the same.

03/28/2023: New firmware version is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.