I have a new ProGraf-1000 Pro and it has a strong magenta cast under all conditions:- Ps CC and Lr CC up to date- Using Canon and Mateo paper with their ICC profiles- Screen is calibrated- 16 bit mode on or off- Printer managed or Application Managed...
Hi, I’m hoping someone can help me! I’ve tried different settings and different paper and I just can’t get my canon pixma pro 100s to print sharp, crisp text. It always looks rough on the edges and us more of a dark grey rather than the black shown o...
I was successfully printing 13x19 photos on fine art paper and on my 4th job, I started getting a message that the manual feed couldn't detect paper. I removed the paper, added it back in the tray and pressed ok. Then the error message indicated that...
We dont really print as much as we used to. our printer can go weeks between usage. every time we go to use it we are low on inks. i visually inspect it and see the ink is still there. The only thing that i can think of is the ink is drying up from s...
I was happily printing on my P100 and got a black cartridge needs replacing warning. I opened the cover, the print carriage moved to the correct spot, the light for the black cartridge was off, I removed the cartridge and inserted a new black ink car...
why oh why oh why do I get low ink warnings with relatively new , legitimate ( expensive) canon cartridges ?Try overriding, try turning off and on again ..... this results in different cartridges flashing red and original 'empty' OK.
Hi,I have a Canon Pixma Pro 100 printer. I started printing using the paper provided with the printer (Luster or Canon Semi Glossed). After about printing 4 lines the printer stops and complains paper jammed and orange light keeps on flashing. I trie...
I am experiencing intermittent problems with my Pixma Pro 100 printing thin white lines, usually when printing dark blue colors, as shown in attached photo. I have done deep cleaning which does not correct problem.
I just bought the Imageprograf pro 300 for packaging comps and was wondering if anyone had suggestions for a good 13 x 19 cardstock that has a bright white and good color, hopefully around the 110lb range?Thanks!!
Print type: Pro PlatinumSize:4x6While printing, 90 percent of the photo comes out perfectly fine until the last few centimeters where I can visibly see and hear the printer slightly shifting the photo paper. The end result is a very blurry last 10 pe...
I have a Canon Pixma Pro-10 and I keep getting these black lines that almost look like roller lines in the center of my prints. It doesn't happen to all of my prints, just certain ones which is very odd. I have cleaned the bottom plate repeatedly. I ...
I have a Pro-200 and have been able to print my cards on 5.5 x 8.5 with no border. I am using Photoshop and evidently a setting has changed and I can no longer get my cards to print without borders. I have tried every setting I can find and have had ...
After a year of sitting idle, my Pixma Pro-10 failed to print 3 colors (Red, Yellow and Photo Black). I cleaned and eventually completely replaced the print head and all ink cartridges - but have the same result.Anyone else have any ideas on what I ...
Good morning,When creating a custom media type with the Media Configuration Tool, there is an option to create a Calibration Target, enabling Unique calibration for the custom media type.Unfortunately Canon documentation does not really explain how t...
Hello All…I’m writing to ask if the pro-10 can be used in sublimation AND, if not, what Canon printers (if any) can be used in that genre. I found some CRAZY ($4k-$12k) priced printers as well as an Epson for $400 and that lead me to investigate what...
