Canon Professional Photo Printers Forum

Printing B&W images

Pixma Pro 100color images converted to B&W with Nik software Should I check the Black and White box in the printer dialog box since the file has already been converted to monochrome? Thanks in advance

ink supply information

new pixma pro 100 the ink supply level seems stuck on full for all 8 cartriges despite a fair amount of printing connected with USB Mac OS 10.9 any ideas on how to get this working? thanks in advance

Resolved! Pixma Pro-1 Leaving On or Off?

Today I picked up the Pro-1 printer and have it up and running and I am just thrilled with the out of the box - Quality of Printes - They are just stunning! So here's my question - I will print sever times weekly on this printer but certainly not ...

squeak ipf700

squeak ipf700 I run 5400sf of printing through this Jan 2008 plotter per year It has begun to sqeak upon completion of a print,just prior to the cutter making its runthenit squeaks again while forwarding the next blank sheetquiet when reversing it in...

Resolved! Pro 9500 nozzle check printing only bottom half of pattern on red, green and cyan colors.

Pro 9500 printer nozzle test prints only bottom half of red, green and cyan colors. Bottom half is normal (no streaking & etc.). Top half is completely blank. Problem started with one color and progressed to three. Since the three colors are in a...

Disable color management on Mac

Hello,I have a PIXMA Pro-1 that I run under OS X 10.9.1.In order to print a target image to create a custom ICC file, I need to disable the Color Management of the printer/driver.(I cannot print with the Color Management Tool Pro because the calibrat...

Pixma Pro-100 applying too much ink to paper

Hi all, I recently bought a Pixma Pro-100 for my office at work. I am a graphic designer and wanted a printer that would be able to print full colour, A3, borderless graphics and photos to a good standard instead of sending these to print from our co...

So, CAN I turn off the printer's color management? Pixma Pro-100.

So, I am trying to turn off the color management function for the Pro-100... On my Windows desktop, I use Photoshop to print with Canson Rag 210, color profile installed, allow photoshop to manage colors and print a beautiful, perfect print with the ...

Is it possible to have both a wired and a wireless setup coexist for a Pixma Pro-100 printer?

Is it possible to set up a Pixma Pro-100 printer using USB connection and the wireless setting so that access from a PC is through a wired connection, while the printer can also be accessed via an iPad without creating conflicts?

Resolved! Canon Pixma Pro10 will not load any paper in the manual feeder

I have just purchased a Cano Pixma Pro io . Have spent the last 48 hours trying to load A4 fine art 225 g inkjet paper among others. It absolutely refuses to accept any paper. Don't want to force it as this is anew printer anf its going back if I can...

Pixma pro-100 Black and white mode

Hi! I´m Enzo and have a pixma pro-100 printer. I use it almost for B/W photos. And i´ve seen the printer uses colour inks for printing black and white. I only want to use Black and gray inks but i don´t know where to select this option. I´ve checked ...

Resolved! Pro 10 & Photoshop CS6

Hi from UK, I have Mac OSX 10.9, Photoshop CS 6 and Lightroom 5.I have updated LR5 with Print Pro software but I am unable to see Print Pro in CS6, it is ok in my CS5 software.Please can you advise if there is a plug in for CS6 and how to go about ...

Resolved! Print Studio Pro

I had to reload my driver for Pixma pro-100, but the Print Studio Pro does not appeare in Canon utilities folder in Start =>All Programs. This prevents me using it with Photoshop Element and lightroom. I have HP Pavilio g6, 64 bit, Win 7 64bit. I try...

Pixma Pro-100 Printer

Can any one please advise if they have had difficulty getting colour cast free B&W prints from the Pro-100 when printing an image file that has been converted to B&W using Photoshop CS5 even when using Canon paper (Paper Plus Glossy II) and the corre...

PRO-1 failed initial setup

I purchased a PRO-1 this evening and started installing the printer.I was very careful to follow each step, reading it twice and then performing it. I installed the ink tanks. Carefully removed the print head from the packaging, inserted it in the pr...

Canon Community

Posts

Printing B&W images

ink supply information

Resolved! Pixma Pro-1 Leaving On or Off?

squeak ipf700

Resolved! Pro 9500 nozzle check printing only bottom half of pattern on red, green and cyan colors.

Disable color management on Mac

Pixma Pro-100 applying too much ink to paper

So, CAN I turn off the printer's color management? Pixma Pro-100.

Is it possible to have both a wired and a wireless setup coexist for a Pixma Pro-100 printer?

Resolved! Canon Pixma Pro10 will not load any paper in the manual feeder

Pixma pro-100 Black and white mode

Resolved! Pro 10 & Photoshop CS6

Resolved! Print Studio Pro

Pixma Pro-100 Printer

PRO-1 failed initial setup

Canon Pro-100 wrinkles one corner

PRO-1100 Which color management to select when usi...

Is there still a market for the Pixma Pro-10?

Profile needed for Canon Photo Paper Glossy GP-701...

imagePROGRAF PRO-1000 No paper choices, tone on BW...

ImagePROGRAF PRO-1000 Recycling Ink Tanks

imagePROGRAF PRO-2100 - PPL "memory may be insuffi...

Need Help shipping imagePROGRAF TC-20

Pixma Pro-200S Can't Specify A3+ Paper Size

PIXMA PRO-100 on Windows 11 not printing correctly...