cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Wi-Fi problems with the Pixma Pro-100

JohnB352
Contributor

The wi-fi connection for this printer only works for about a week, then i get a message saying the printer can't be found.  But what's odd is I can ping it's address and I can connect to it's web interface with the static IP that the printer has.  If I re-run the install with the CD it will work again.  It isn't a router or network problem.  If it was I wouldn't be able to ping it and connect to it's web page.  Seems like a port problem.   Are there known problems with wi-fi for this printer?

Why can't a standard TCP/IP port be used?

4 REPLIES 4

ebiggs1
Legend

Sleep timeout.

EB
EOS 1DX and 1D Mk IV and several lenses!

That's one possibility, but not in my case.  I turn the printer off when I'm not using it.

Hello JohnB352.

 

What version of Windows or Mac OSX is installed on your computer?  Also, please tell us what error occurs when communication fails on the system.

 

If immediate assistance is needed, feel free to call us at 1-800-OKCANON.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hi Michael - I believe I know what the problem was.  My printer had a static IP address.  I believe it was 192.168.1.7

I have my router configured to start at 192.168.1.100 for DHCP address leases.

When I couldn't print I checked the printer, I discoverd the IP address for the printer was 192.168.1.126.  I used that address to bring up the admin web page for the printer.  It was still set to static.  How it ended up with 192.168.1.126 I don't know.

 

But anyway, I ran the setup CD again. Set the static IP address to 192.168.1.5, wrote it down, so I'm sure next time if it changes.  But I've tried it every day since and it's kept that address.  Normally I only use the printer a couple times a month.  So I keep it turned off.  

Thanks.

Announcements
08/18/2023: Canon EOS R5 C training series is released.

07/31/2023: New firmware updates are available.

CR-N700 - Version 1.2.0

CR-N500 - Version 1.3.0

CR-N300 - Version 1.3.0

CR-X300 - Version 1.1.0


06/30/2023: New firmware version 1.0.5.1 is available for EOS-R5 C

05/31/2023: New firmware updates are available.

EOS R6 Mark II - Version 1.1.2

EOS R6 - Version 1.8.2

EOS R7 - Version 1.3.1


05/18/2023: New firmware updates are available.

EOS Rebel T100 - Version 1.1.0

EOS Rebel T7 - Version 1.2.0

EOS 5D Mark IV - Version 1.4.0

EOS 6D Mark II - Version 1.2.0

PowerShot Elph 360HS - Version 1.1.0.0

PowerShot SX420 IS - Version 1.1.0.0

PowerShot 620 HS - Version 1.1.0.0

PowerShot SX720 HS - Version 1.1.0.0

PowerShot G1X Mark III - Version 1.1.0.0

PowerShot G7X Mark II - Version 1.2.0.0

PowerShot G9X Mark II - Version 1.1.0.0

 

04/20/2023: New firmware version 1.4.1 is available for EOS R3

03/30/2023: New firmware updates are available.

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10


02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5