Print Studio Pro question: some images don't open
Hi, sometimes PSP doesn't open my files. I get a blank page. Down in the left hand corner there is a question mark and the image is unchecked. How do I remedy this? Thanks.
Posts
Pixma 100 Profile
I have the Pixma Pro 100 and a MacBook Pro. I am an old Windows guy and not that good on the Mac, but learning slowly (not good at navigating the Mac yet). I am not sure how to use the profiles from various papers. I have downloaded the profiles and ...
Resolved! Updated software/Firmware to print 13x38 on Pixma Pro-100
Please consider an update to allow the Pixma Pro-100 to print 13x38 Red River Paper and roll paper. Thanks for considering this request.
Paper icc profiles with 1/2/3 or 4 in the name ??
I would like to know what the significance of the numbers within the canon profile icc paper listings has? For instance, I used the Canon Photo Paper Pro Luster paper type for a print tonight. I used Photoshop CS6 and used the Canon Print Studio Pro ...
Canon profile for "GP-601"
I purchased ink from Canon for my Pro-100. The ink came bundled with Canon “Photo Paper Glossy” (GP-601). Where can I find the profile for this paper?
Print Studio Pro, LR, and Photoshop Elements
When I install Print Studio Pro, it asks if I want to install it in LR but does not ask if I want to install it in Photoshop Elements. I want to use it with PSE, but can't figure out how to install it in PSE. If I say 'yes' to installation in LR, i...
Any info available about printing greeting cards with the Pixma Pro10? Thanks.
Hello. I've got a Pixma Pro10 on order and I'd like to use it to print greeting cards among other things. Could I be pointed to any discussions or information on that topic if available?
CANON PRO-1 PRINTER PROBLEM WITH PRINTS SMALLER THAN 8.5" X 11"
I own a Canon pro-1 printer and I am trying print images in either 4x6 or 5x7 formats. The printer starts to operate the print moves part way down the printer's rear tray slot and the stops. An error messge appears on screen informing me that the p...
Printing B&W images
Pixma Pro 100color images converted to B&W with Nik software Should I check the Black and White box in the printer dialog box since the file has already been converted to monochrome? Thanks in advance
ink supply information
new pixma pro 100 the ink supply level seems stuck on full for all 8 cartriges despite a fair amount of printing connected with USB Mac OS 10.9 any ideas on how to get this working? thanks in advance
Resolved! Pixma Pro-1 Leaving On or Off?
Today I picked up the Pro-1 printer and have it up and running and I am just thrilled with the out of the box - Quality of Printes - They are just stunning! So here's my question - I will print sever times weekly on this printer but certainly not ...
squeak ipf700
squeak ipf700 I run 5400sf of printing through this Jan 2008 plotter per year It has begun to sqeak upon completion of a print,just prior to the cutter making its runthenit squeaks again while forwarding the next blank sheetquiet when reversing it in...
Resolved! Pro 9500 nozzle check printing only bottom half of pattern on red, green and cyan colors.
Pro 9500 printer nozzle test prints only bottom half of red, green and cyan colors. Bottom half is normal (no streaking & etc.). Top half is completely blank. Problem started with one color and progressed to three. Since the three colors are in a...
Disable color management on Mac
Hello,I have a PIXMA Pro-1 that I run under OS X 10.9.1.In order to print a target image to create a custom ICC file, I need to disable the Color Management of the printer/driver.(I cannot print with the Color Management Tool Pro because the calibrat...
Pixma Pro-100 applying too much ink to paper
Hi all, I recently bought a Pixma Pro-100 for my office at work. I am a graphic designer and wanted a printer that would be able to print full colour, A3, borderless graphics and photos to a good standard instead of sending these to print from our co...
