01-24-2019 11:52 AM
The print driver menu for the Pro-1000 has numerous settings under Printer Features. Please advise on what settings should be used to get the highest quality.
Under Printer Features, the following menu headings appear.
ProfileID
Output Resolution
Media Type
Paper Source
Quality
Black and White Photo Print
Borderless Extension
MarginType
Print Quality
Black and White Photo Print.
Print Quality can be adjusted (Highest, High, Standard, Custom)
Output Resolution and Quality can also be adjusted (300 x 300, 600 x 600, 1200 x 1200) and (Super Fine, Fine, Normal, Fast)
How should these settings be set.
01-28-2019 12:51 PM
Hi nedmcculloch,
I would start with the default settings when you download the printer driver and then if you are not happy with the quality or the speed of the prints, then adjust the settings.
If this is a time sensitive matter and would like to review the printer settings, please contact our support group at 1-800-OK-CANON (1-800-652-2666), Monday - Friday, 8:00 AM - 8:00 PM EST(excluding holidays).
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.