12-13-2022 11:59 AM - last edited on 12-13-2022 12:06 PM by Danny
I was finally making beautiful prints with the printer profile working perfectly... i updated to Ventura 13.0.1 and now my printer profile isn't working anymore. Has anyone else run into this problem and if so, what did you do?
I'm working on a MacBook Pro printing on a Pixma Pro 100 on Hahnemuehle Baryta paper
Thank you!
12-13-2022 02:17 PM
If you search the forum and/or web you will see that many Mac users that have upgraded their OS are having issues. I am not a Mac users but it seems like a bad coincidence if the OS is not to blame. I don't know why it would be however.
12-13-2022 02:28 PM
@NLevine wrote:I was finally making beautiful prints with the printer profile working perfectly... i updated to Ventura 13.0.1 and now my printer profile isn't working anymore. Has anyone else run into this problem and if so, what did you do?
I'm working on a MacBook Pro printing on a Pixma Pro 100 on Hahnemuehle Baryta paper
Thank you!
Usually, after an OS update a re-install of the driver is necessary.
1. download and install the latest driver from the Canon support site.
2. I remove the existing version of the printer and then add the printer again.
3. Since you are using third party papers you know you need to wait for the Canon IJ Series to appear.
You should be all set.
12-22-2022 09:13 AM
Thank you for saving me! So appreciated
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.