cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

imagePROGRAF TM-305 Cutting Carriage Jamming

KWelker
Apprentice

Our TM-305 occasionally starts moving the cutting carriage prior to the print completing.  In other words the paper is still feeding when the carriage begins to cut.  The result is a crumpled paper jam and the carriage stops somewhere in the first 3 to 12 inches causing a print error.  Usually releasing the paper, manually moving the cutting carriage back to its home and reloading the paper resolves the issue.  Sometimes it shows a printer error requesting a reboot.  Sorry I do not have the error code, I will add that to this post next time it happens.

Firmware is up to date and this issue has happen through several firmware version.

It is annoying but seems to be happening more frequently, about every 100 prints or so.

Any ideas?

1 ACCEPTED SOLUTION

Michael
Product Expert
Product Expert

Hello.

Troubleshooting with our support group will be needed to narrow down the cause of this issue.  Please contact our support group at  1-800-423-2366 for additional assistance with this matter.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

1 REPLY 1

Michael
Product Expert
Product Expert

Hello.

Troubleshooting with our support group will be needed to narrow down the cause of this issue.  Please contact our support group at  1-800-423-2366 for additional assistance with this matter.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!