imageRUNNER ADVANCE C3530i III, can't specify a paper
I can't seem to specify a paper try when trying to print. I've tried downloading multiple drivers, none will allow me do this. Any suggestions? I have Windows 11, 64
Posts
imageRUNNER ADVANCE DX C3930i Deploying Driver using CMD or PowerShell
Just need to push out Generic_Plus_PCL6_v2.90_Set-up.exe to several machines. I would like to do it silently of course. What's the syntax and additional commands, if any please?
imagePRESS C750 How to fold and staple with a vertical fold
I want to saddle fold/staple this brochure. But it only want to do a fold using LTR-r paper. I need LTR (portrait-vertical fold) not potrait landscape fold. Make sense?
imagePROGRAF TM-300 auto alignment failed
canon tm-300 problems;1-auto ,fine and manual head alignment failed after head cleaning 2 and 3 times.picture no (1)2-color issue as shown in pictures no (2,3,4)3-black color strips show picture no(5,6,7)1 head alignment failed4 color issue5 black co...
imageRUNNER ADVANCE DX C5860i Gradient color problem on Canon Generic Plus PCL6
Hello, I have a project running where I have to print out office lists and for this I use a gradient in the background as a graphic background element. We have 2 models of the same printer, Image Runner Advance DX C5860i , one that is older and one t...
Resolved! imageRUNNER ADVANCE Series - Trouble with updated Generic Plus PCL6 Driver
Good Day,We recently had to update from Canon Generic PCL6 Driver to Canon Generic Plus PCL6 Driver in our environment after a recent rash of end-users not being able to print from workstations (that have been in service varying amounts of time) and ...
LUCIA PRO II ink compatibility with imagePROGRAF PRO-2000 & PRO-4000
https://www.usa.canon.com/newsroom/2024/20240125-pro-printers Will these be compatible with older PRO printers??
ImagePROGRAF 4000 leaving a black blob
Recently, my Pro 4000 printer has been leaving a black wet blob in the top right corner, which causes the print rollers to leave dots until it dries up. I suspect it might be the print head, but I replaced it only 18 months ago. However, I noticed th...
Custom paper profiles no longer working when printing from PS to Canon Pro-4000 (Mac Ventura, M1)
Perhaps it started when I recently upgraded to Ventura (i'm on 13.6.4). My custom profiles I've been using successfully for years, no longer produce accurate color (brownish cast) when printing from PS. Some folks suggest the profile is being applie...
Can't get images to print properly on Matte paper on imagePROGRAF Pro-4100
Hello Canon community, I'm facing an issue with my Canon Pro 4100 printer. When printing on satin or luster photographic paper, everything works smoothly. However, I've noticed that when I switch to matte-coated paper, the black ink doesn't print as ...
imagePROGRAF TM-200 Fine overlapping lines or gap lines on all my photo prints.
I have been having an issue with printing photos, mainly see it more on full print photos and not as much on certain photos (although they are still there but not as noticeable) Printer #TM-200Does anyone have any solution to this problem? My printe...
imageRUNNER ADVANCE DX C3830i only scans 4 times and stops
Hi,I'm having trouble with our cannon scanner. It's a big office type printer scanner. Not sure what it is. It is scanning 4 separate times then won't scan after that. It just keeps trying. I eventually get a "TX report" saying it was "unable to send...
imageRUNNER 1023iF Copier smearing
I have a Canon Image Runner 1023IF that smears the left side of the paper on each copy. I am attaching a pic of the problem. I have replaced a roller that I thought was toner soaked on that end. That was not the case. It is a new drum as well as tone...
Banding Issue imagePROGRAF PRO-4100
I have an imagePROGRAF PRO-4100. I'm trying to print photos on 17x22 silver rag paper, which I have successfully done in the past, but right now I'm having banding issues which are only affecting the large size. I've tried on 8.5x11 of the same type ...
Oce Colorwave 600 - Error Code 7506
I am trying to work on a Oce Colorwave 600 plotter that is giving me an 7506 error message. I have unplugged it for 5 mins, power it back up and then it gives me the 7506 error message.Suggestions on what it could be?
