01-21-2022 09:46 AM
I have a Canon ImageClass MF4880 printer and a piece of paper was jammed during printing. I followed the instruction to open the printer, but the paper was so tightly jammed that I could not remove it at all (pic1). After hard trying, the paper was badly torn (pic2). How do I fix the problem?
01-21-2022 11:01 AM - edited 01-21-2022 11:01 AM
Hi,
Its nearly impossible for us to tell you how to get jammed paper out of the device without being there.
See this KB article for assistance.
Canon Knowledge Base - If <Paper jam.> Appears
Please take your time and be gentle. Things can break if you pull and tug.
~Rick
Bay Area - CA
~R5 C (1.0.9.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve Studio ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
01-22-2022 04:16 PM - edited 01-22-2022 05:05 PM
Thank you. I have already checked but doesn't help. The paper is too tight to be removed.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.