Office Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

MAXIFY MB5420 Support Code B504

My printer (Maxify MB5420) was working fine a couple of days ago. Canon had an update that I performed. I tried printing this morning and that error code B504 will not go away. I have brand new cartridges in the printer and I have tried a hard reset ...

Keith63 by Apprentice
  • 2302 Views
  • 2 replies
  • 1 likes

Difference between MF644 and MF656 printers?

Hello, can anyone tell me what the difference is between the imageCLASS MF644cdw and the imageCLASS MF656cdw?Both of these color MFPs appear to have identical specs, except the MF656 is slightly larger. However, both of their weights are somehow the ...

Dylan1 by Apprentice
  • 8566 Views
  • 5 replies
  • 0 likes

Resolved! Color imageCLASS MF641Cw: Won't print two-sided

I cannot find where to set up my new Color imageCLASS MF641Cw so I can print two-sided.  It's not showing up under any of the settings, which doesn't make sense to me.  Can this printer print on both sides?I'm also having issues with it automatically...

imageCLASS MF236n issue scanning with feeder

I have MF236n canon printer / scanner / copier. I can make copies, print with no issues. I can scan one sheet at a time with bed. feeder wont work. when I load i get the beep but when i click to scan i get a mf scan utility message "selected paper si...

ryeme by Apprentice
  • 1312 Views
  • 3 replies
  • 0 likes

ImageCLASS MF632 Wireless Printer Setup Issues

I've been trying to wirelessly setup my Canon ImageCLASS MF632 with my computer on Windows 10, but have run into some issues. My printer is connected to WiFi (same network as my computer), and I have downloaded the drivers.To add my printer to my com...

27_baker by Apprentice
  • 1346 Views
  • 1 replies
  • 0 likes

Custom page size on Canon MF743Cdw

I recently got a new desktop and am now using this printer with it. Previously, from my laptop, I had printed to some 3x5 index cards and to some 4 3/16 x 5/7/16 cards. From the new computer, I can't figure out how to do either of these things. When ...

MAXIFY MB2720 how to clear code 2802

Code 2802 will not clear. There are no papers hung in autofeed tray. Code will not clear after pressing OK. My printer will not work due to this code. I have tried unplugging to reset it. This code still comes up. I have checked the feeder as well to...

jkcbcctc by Apprentice
  • 790 Views
  • 1 replies
  • 0 likes

TWAIN Driver and imageCLASS MF4150

My MF5200 used to interface with Twain, but it doesn't anymore.  Is there a way to use a twain driver with this multi-function laser printer?  If so, how?  Thanks.

JimMayor by Apprentice
  • 1413 Views
  • 3 replies
  • 0 likes

Issues with my computer recognizing imageCLASS D1650

Purchased a D1650 Image Class 3 months ago and bypassed the PIN configuration as I intended to only print and copy.  Connected via USB and all worked well until this morning my computer did not recognize the D1650.  Have reinstalled drivers several t...

MB2720 only prints partial black ink

My Maxify MB2720 will only print partial of the black ink, leaving lines randomly throughout a document.  All of the ink cartridges are full and I have tried all of the troubleshooting on the printer itself (cleaning, deep cleaning, head alignment, r...

RadonRid by Apprentice
  • 658 Views
  • 1 replies
  • 0 likes

Resolved! MF644CDW stopped printing envelopes

Was able to print envelopes with no problem then all of a sudden it won't any more. Have checked the paper settings and they seem to be the same. Using the multifunction tray. Now it only prints on full size paper and won't activate the multifunction...

randyc1 by Contributor
  • 2522 Views
  • 7 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements