06-17-2020 01:50 PM
My Canon MF642cdw is the first printer I've owned that has a document feeder. It's very useful but it's been jamming on me once in a while.
I've tried following the directions to remove the sheet of paper in the feeder but the paper is thin and If I pull too hard the paper will rip. Is there a way to bump the roller motor to feed the sheet through the feeder or temporarily relieve the pressure between the rollers to pull the sheet through?
Solved! Go to Solution.
06-17-2020 02:49 PM
Hi mightypilot.
Directions for clearing a paper jam from the MF642Cdw's document feeder may be found at the following page in the online manual:
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
06-17-2020 02:49 PM
Hi mightypilot.
Directions for clearing a paper jam from the MF642Cdw's document feeder may be found at the following page in the online manual:
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.