I have a Canon SL1 with a Canon EF 70-300mm f/4-5.6 IS that I'm using to take pictures and video of my son surfing. I'm finding pictures and video of surfing hard to take in general even with a monopod (lots of waiting followed by 3 seconds of actio...
Hi everyone!I just purchased a Canon 50mm STM lens and I would like to know if I need to switch the lens to MF indicator when shooting in manual focus mode or should I just leave it on AF then just change the settings on my camera to manual focus? (P...
Thanks in advance. You assistance is appreciated. Please review my stated needs below and suggest the absolute least cost Canon digital cameras (either discontinued no matter how old the model or right up to the latest and greatest which are still in...
Is it normal for the sensor to be moving freely when the camera is turned off? The moment i turn on the camera, the IBIS gets activated so the sensor doesn't float around but when I turn off the camera the sensor seems to be freely moving.
Hello, Is there a difference between firmware 1.1.1 for the Canon R5 and R6 ?
Hi everyone I'm new to this and just got a EOS 6d i must have changed a setting because now when I review the picture. I see black parts of the picture blinking..what do i need to change on the setting to fix this,.?
Hello, I have recently purchased a EOS Rebel T6 1300D. I use to have the problem of the camera saying "BUSY" and wouldn't take photos or flash when needed. I reasearched it and got a SD card compatiable with camera. I went to settings and reset them ...
I just got the M100... I have very mixed feelings about it because of the interface. In any case, I will be using it for taking pictures out of an airplane cockpit. Lighting and focus are always impossible using any automatic mode. There are too m...
WIth firmware 1.7 and the camera set to enable sensor cleaning at power-off (or set to enable which cleans at power on and off), the R runs cleaning when it's powered off and a LENS is detached or attached. I think this was a firmware bug introduced ...
I enabled R6 multi-controller through the customized buttons, but I don't see anything happening in the viewfinder or LCD when I press it. Wondering if I am missing something? Any guidance on its operation. Thanks.
Hello, I've had my Canon 77D for a year now with no problems. I haven't split anything on it or anything of the sorts, it is still in good condition. I've been having a problem where the dial to change modes is not working at all. It is currently stu...
Hi! I'm a bit of a new user of these cameras, but I've followed the instructions on preivous posts on this issue, and it seems I still have this problem.Firstly-- I have a Deity Microphones V-Mic D3 Pro High SNR Super-Cardioid Directional Shotgun Mic...
Good day to you all, I've installed the EOS Utility on my computer with Windows 7 and 64 bits and it works fine. All parts of the program(s) work as expected. I've also installed in on a othe computer with windows 10 and 64 bits and one important par...
I've had one prior experience with Canon customer service, and it was terrible. I thought they'd never be able to match it, but now I can't contact them by phone at all, and their email form won't let me click the "submit" button to send communicati...
I must say I'm very disappointed in my R5s reliability.This week I put my second replacement R5 camera through the works on the set of a large TV show. In 2 days and 4,000 it froze between 20-30 times requiring a battery pull. One of two things happe...
