02-04-2020 09:21 AM
02-05-2020 02:17 PM
It amazes me when people go to all the trouble of asking for help on a forum then not only do they not take the slightest notice of what helpful forum members suggest what they should do to rectify the problem but they get all defensive when it is suggested that they might have done something wrong themselves
02-05-2020 02:40 PM
And what surprises me most of all, I think, is that we've not seen even one sample picture that might help in analyzing the OP's problem. Members here won't likely be able to actually repair a defective camera in the forums, but they can surely advise some ways to troubleshoot certain issues before the camera has to be sent away to a repair center for an undetermined period of time.
02-05-2020 02:55 PM
BurnUnit said,
" but they can surely advise some ways to troubleshoot certain issues before the camera has to be sent away to a repair center for an undetermined period of time."
And I would add to his wisdom that needlessly sending a camera to a repair center creates a non-zero chance of shipping loss or damage with the additional hassle that brings.
More than once I have purchased a "new" item that has clearly been out of its box before either tried in the shop or returned. There are many opportunities for a new camera to have been touched before it was purchased by the new owner and resetting to default is a quick way to rule out that issue.
Rodger
02-05-2020 03:04 PM
@wq9nsc wrote:BurnUnit said,
More than once I have purchased a "new" item that has clearly been out of its box before either tried in the shop or returned. There are many opportunities for a new camera to have been touched before it was purchased by the new owner and resetting to default is a quick way to rule out that issue.
Rodger
We actually don't seal our boxes because we've found that our customers are a little more tactile. They like to touch the cameras, and try them out a little before purchase. It's not uncommon at all to get a brand new camera that's been "test driven," which means the settings will likely be all over the place. What is uncommon is to get a camera in a sealed box. That is often a telltale sign of a returned product. Our boxes are never sealed at the factory.
02-06-2020 12:05 PM
02-06-2020 12:32 PM
I was not going to post to your replies but I can't resist any longer. The reason we suggest to reset the camera when any unknown issue happens it two reasons. One it is very easy to do. Two it is a free remedy that works a significant amount of the time. It does not merit a derogatory response form you. We are simply offering solutions.
There is no doubt the best place for any problem with a Canon camera is at a authorized Canon repair facility. Not this forum!
This is what you presented us with;
"My new 80D purchased at Costco as a bundle with a nice pair of Canon lenses has always taken pink pictures. I seldom get good photos from this camera .... I've never touched any other setting ever. .... Is Canon going to admit they have a serious problem and help us besides telling us to service a camera? ...(Canon) ... cameras are garbage from day one of purchase?"
The 80D is not garbage as many thousand upon thousands preform beautifully everyday. Most do not take "pink" pictures.
You never even mentioned what lenses you bought in the "bundle". Or,offered a sample photo, just I didin't do anything wrong. Just that Canon needs to admit it has a serious problem.
At this point I suggest you take your own advice and, "the Canon repair facility is only five miles from my house so I can drive right over ... and let them do their thing on my camera."
I bet they do a factory reset first off.
02-10-2020 08:32 PM
@Horsefeathers wrote:
You people dont read anything I'm posting here.
I pretty much stopped reading your posts because you whine too much. Why others are continuing to waste their time and effort on you I don't know.
02-06-2020 12:16 PM
02-10-2020 11:54 AM
02-10-2020 12:23 PM
You seem to think all other companies except Canon make 100% perfect products? If there is a problem Canon people will fix it.
I would lighten up a bit with the, " many (Canon) cameras are garbage from day one of purchase?", before you make the Virginia trip. Sugar vs vinegar thing. Good luck and do get back with us.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.