03-06-2016 05:55 PM - edited 03-06-2016 05:56 PM
When I installed the EOS DIGITAL SOLUTION DISK for my brand new 7d mark ii a window popped up stating:
this software is not compatible with your operating system
I am using an old dell running fine with XP, is there a way to bypass this, I already have photo prof., eos utility etc. from my rebels.....
ANY and ALL assistance would greatly be appreciated
Solved! Go to Solution.
03-15-2016 07:33 PM
Thanks Bob, but at the moment I will have to shoot just jpegs and upload from camera in that way. I had my knee replaced and have been out of work for a few weeks. I have been working on some collages for the racers during my down time so hopefully I can save up enough for an upgrade : )
03-15-2016 09:32 PM - edited 03-15-2016 09:33 PM
Anyone with W7 can upgrade to W10 for free up until mid-2016; one year after the release of W10. And, they give 30 days to try it and if there are problems they can roll back to W7. After 30 days the W7 files are erased.
I had had issues with W10 and my monitor. It wouldn't recognize the monitor (a LaCie 320) and thus wouldn't load the Xrite profile. I had to do it manually each time computer rebooted.
I saw saw no pluses to W10 and thus reverted back to W7.
03-16-2016 07:44 AM
@jrhoffman75 wrote:Anyone with W7 can upgrade to W10 for free up until mid-2016; one year after the release of W10. And, they give 30 days to try it and if there are problems they can roll back to W7. After 30 days the W7 files are erased.
I had had issues with W10 and my monitor. It wouldn't recognize the monitor (a LaCie 320) and thus wouldn't load the Xrite profile. I had to do it manually each time computer rebooted.
I saw saw no pluses to W10 and thus reverted back to W7.
Now that you mention it, I realize I was in error. Indeed, there have been complaints from system managers that Microsoft makes it too easy for their users to bypass corporate policies and upgrade their Windows 7 systems to Windows 10. Strictly speaking, though, it may not be accurate to call it a free upgrade. All Microsoft updates to Windows 7 computers are free, but my understanding is that that's not the case (or soon won't be) with Windows 10. The story goes that at some point Windows 10 users will have to go on subscription or no longer receive updates. Darker versions of the story imply that your Windows 10 installation will go dead if your subscription lapses.
I do think there are some advantages to Windows 10 (and even to Windows 8.1) over Windows 7. But they're mostly cosmetic and probably beyond the scope of this discussion.
03-16-2016 01:35 PM
@RobertTheFat wrote:
...Unless the OP's "old Dell" is one of the most powerful XP machines on the planet, I'd be very surprised if Windows 10 is usable on it...
When the OP said "upgrade to Win10" I assumed they were anticipating both a hardware and software upgrade. Just went thru the same process several months ago when my XP desktop conked out and I was a little strapped for "disposable income". A local shop offered me a good deal on a Win7 Ultimate machine and the changeover went pretty smoothly. Some of my older software had to be installed in Comparability Mode but it's been running smoothly since. But there was no 64 bit software upgrade available for my 10+ year old Canon scanner, not surprisingly.
I assumed that my new PC running Win7 was upgradable to Win10 since MS reminds me several times a week that I can upgrade for free, at least for a couple more months.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.