01-07-2023 05:24 PM - last edited on 01-10-2023 09:22 AM by Danny
I have a new Eos rebel T7. Not sure built in flash works…. Can I reset factory settings?
Solved! Go to Solution.
01-07-2023 08:04 PM
Actually found the hot show cover was engaging switch. Removed and all ok for now
01-07-2023 05:57 PM
Is the camera in manual mode?
To reset your settings, bring up the third wrench menu (right-most of the wrench menus), scroll down to "Clear settings" and select it. You'll have a choice of what to clear including the ability to clear all camera settings.
See page 194 of the User Manual for details.
01-07-2023 08:03 PM
Actually found the hot show cover was engaging switch. Removed and all ok for now
01-07-2023 06:14 PM
Hello gestewart65 are you sure the built in flash doesn't work. On certain Rebel series cameras you must manually pop up the flash even in Full Auto mode. In order to pop up the flash you must push the flash button that is located behind the main dial.
-Demetrius
EF 16-35mm F/2.8L III USM, EF 24-70mm F/2.8L II USM, EF 28-135mm F/3.5-5.6 IS USM (Retired), EF 50 F/1.8 STM, EF 85mm F/1.8 USM & EF 70-200mm F/2.8L IS III USM
EOS 40D (Retired) & 5D Mark IV
430EX III-RT, 470EX-AI & 600EX II-RT
01-07-2023 08:04 PM
Actually found the hot show cover was engaging switch. Removed and all ok for now
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.