Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Scan Guide for Canoscan 9950F

I just don't know why a simple download can't be done to obtain the above mentioned guide.  The only manual provided with this scanner was the "Quick Start Guide".  I have spent the better part of an hour trying to open the downloaded "Scan Guide" to...

I MX 850 error

I have a mx850   the yellow alarm light is blinking  and LED has error code 200    What are my options??Thanks 

JJcannon by Apprentice
  • 4572 Views
  • 1 replies
  • 0 likes

Error 5C00

Canon MP620 makes loud noise and stops with error 5C00 on bar of screen and says see manual but can't find anything in manual about this error.  No paper jam, but ink tray goes to extreme right and stays there.  Thank you for any help.  Bill

Canon Pixma MG2220 - Instillation issues

So I got this Printer for Christmas and I've been trying to set it up but it fails to detect the printer being plugged in but it shows up under unknown devices... So I don't know what to do any help would be great.My specs: Windows 8 x64AMD 8 Core 5....

xBeksimx by Apprentice
  • 4660 Views
  • 2 replies
  • 0 likes

mg5300 will not print text

mg5300 running with Mac osx 10.9.1 and an second gen ipad. Will not print text but will print pictures. Tried the cleaning and alignment of the heads. It will print the rows of graphic images but not the letters that label the columns. I have tried v...

gkivett by Apprentice
  • 4552 Views
  • 1 replies
  • 0 likes

Copy a document on an mg3200 printer

I have not found a way of making a copy except to scan the document first and then print it.  Doing this, if the document is written in pencil, the writing is not made black, but rather grey scale.  On a typical copier, the writing is made black and ...

error message C000

After a paper jam, in spite of clearing all the paper out, my PIXMA MX892 has stopped working and only shows an error message with the code "C000" and the message:Printer error has occurred.Turn off power then back on again.If problem persists, see t...

mabastil by Apprentice
  • 4451 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.